Abstract:The Acoustic Emission (AE) phenomenon has been used as a powerful tool with the purpose to either detect, locate or assess damage for a wide range of applications. Derived from its monitoring, one major current challenge on the analysis of the acquired signal is the proper identification and separation of each AE event. Current advanced methods for detecting events are primarily focused on identifying with high accuracy the beginning of the AE wave; however, the detection of the conclusion has been disregarded in the literature. For an automatic continuous detection of events within a data stream, this lack of accuracy for the conclusion of the events generates errors in two critical aspects. In one hand, it deteriorates the accuracy of the measurement of the events duration, truncating the span of the event (undesirable in evaluation applications), and in the other hand, it causes false detections. In this work, an accurate and computationally efficient AE activity detector is presented, using a framework inspired by the area of speech processing, and which provides the required indicators to accurately detect the onset and the end of an AE event. This is achieved by means of a threshold approach that instead of directly operates with the transduced voltage signal it does so over the Short-Term Energy and the Short-Term Zero-Crossing Rate measures of the signal. The STE-ZCR method is developed for an application related to the continuous monitoring of a single AE channel derived from the characterization of metallic components by means of a uniaxial tensile test. Additionally, two experimental test-benches are implemented with the aim to quantify the accuracy and the quality of event detection of the presented method. Finally, the obtained results are compared with four different techniques, representing the current state of the art related to AE activity detection.

Feasibility Study of Acoustic Emission Monitoring of Hot Cracking in GTAW Weld

Fibre Optic Acoustic Emission Sensor System for Hydrogen Induced Cold Crack Monitoring in Welding Applications.

Acoustic Emission Detection During Welding Residual Stresses Release in 2.25cr1mo0.25v Steel Welds

Acoustic Emission Entropy For Evaluation Of Fracture Toughness Of Hsla Steel Welded Joint

Research on Welding Residual Stress Measurement Using Electromagnetic Acoustic Transducer

Detection of defects during laser-powder interaction by acoustic emission sensors and signal characteristics

An Experimental Analysis for Damage Monitoring in Glass Fiber/Epoxy Composites During Fatigue Tests by Acoustic Emission

Failure Characterization of Al-Zn-Mg Alloy and Its Weld Using Integrated Acoustic Emission and Digital Image Techniques

An Extraction Method of Welding Crack Acoustic Emission Signal Using Harmonic Analysis

Study on Acoustic Emission Characteristics of Fatigue Damage of A7N01 Aluminum Alloy for High-Speed Trains

An Acoustic Emission Activity Detection Method based on Short-Term Waveform Features: Application to Metallic Components under Uniaxial Tensile Test

Real-time Defect Detection in Pulsed GTAW of Al Alloys Through On-Line Spectroscopy

Acoustic emission technology-based multifractal and unsupervised clustering on crack damage monitoring for low-carbon steel

Analysis of acoustic emission signal in the tensile process of weld-bonding joint and its damage model

Feasibility assessment of non-contact acoustic emission monitoring of corrosion-fatigue damage in submerged steel structures

An Experimental Assessment Using Acoustic Emission Sensors to Effectively Detect Surface Deterioration on Steel Plates

A novel data-based approach for monitoring fatigue crack propagation in welded joints under varying ambient temperature using the electromechanical admittance

Application of Multivariate Acoustic Emission Parameters in Damage Monitoring and Assessment of a Low-Alloyed Steel

Weld acoustic emission inspection of structural elements embedded in concrete

Electromagnetic Stimulation of the Acoustic Emission for Fatigue Crack Detection of the Sheet Metal

Acoustic Emission Monitoring of Progressive Damage of Reinforced Concrete T-Beams under Four-Point Bending