Abstract:In vessel retention (IVR) is one of the key severe accident mitigation strategies to maintain reactor pressure vessel (RPV) integrity. IVR designs utilize the reactor pressure vessel lower head to contain molten fuel and rely on external reactor vessel cooling (ERVC) to remove decay heat. The capacity of ERVC is limited by the critical heat flux (CHF) of flow boiling on the outside of the reactor vessel surface. Therefore, the determination of critical heat flux (CHF) is crucial to predict whether the adoption of IVR would be successful in mitigating severe accidents. In 1999, Celeta et.al proposed a superheated layer vapor replenishment model. In this model they postulated that CHF would occur when the superheated layer was occupied by the vapor blanket coming into contact with the heated wall and they successfully predicted the critical heat flux in subcooled water flow boiling under high mass flux, high liquid subcooling and low/medium pressure conditions. To evaluate the practicability of this model in predicting CHF under IVR conditions, CHF experiments were performed under natural circulation conditions on the experiment facility "Test of External Vessel Surface with Enhanced Cooling" (TESEC). Experiments are conducted in a 30 mm wide, 61mm high rectangular flow channel with a 200 mm long heated surface along the flow direction. Two quartz windows are installed at the sidewalls of the flow channel for visualization. In order to simulate various positions of the reactor lower head, experiments at different inclination angles of the test section were conducted. The high speed visualization data at CHF point at various inclination angles were processed and analyzed by a MATLAB code developed by the author. The vapor blanket thickness at various inclination angles was measured from the visualization data and was also predicted by the Celeta model. By using geometry data from high speed images, CHF values were calculated by Celeta model and compared with the experimental results at various inclination angles. Limitations of the Celeta model in adaptation of predicting CHF under IVR conditions were further discussed.

Cfd Simulation on Critical Heat Flux of Flow Boiling in Ivr-Ervc of A Nuclear Reactor

CFD study on flow-boiling characteristics and predicting critical heat flux under natural circulation conditions of IVR-ERVC

Prediction Of subcooled water flow boiling critical heat flux (CHF) at low pressure

CHF experiments and prediction model under subcooling flow boiling condition in passive IVR-ERVC system

Experimental Investigation of 3-D ERVC Process for IVR Strategy – CHF Limits and Visualization of Boiling Phenomena

ICONE23-1360 A NEW DETERMINATION APPROACH ON CRITICAL HEAT FLUX WITH INVERSE HEAT CONDUCTION PROBLEM

Numerical Investigation on the Thermal-Hydraulic Characteristics near a Corroded Lower Head of the Reactor Vessel During IVR-ERVC

Numerical study on the thermal hydraulic characteristics of ERVC system

Experimental Study on CHF Using a Full Scale 2-D Curved Test Section with Additives and SA508 Heater for IVR-ERVC Strategy

A Critical Heat Flux Model for Saturated Flow Boiling on the Downward Curved Heated Surface

A CHF Correlation and Flow Pattern Observation on a Downward-Facing Boiling Surface

Prediction of Critical Heat Flux for Subcooled Flow Boiling in Annulus and Transient Surface Temperature Change at CHF

Flow boiling experiments for CHF evaluation under downward-facing heating including flow visualization: Effects of pressure, orientation, mass flux, and local quality

Evaluation of Passive Circulation Flow Characteristics and Chf under In-Vessel Retention

Machine Learning Prediction of Critical Heat Flux on Downward Facing Surfaces

CFD simulation on the transient process of coolant mixing phenomenon in reactor pressure vessel

Numerical simulation study of boiling Critical Heat Flux characteristics of graphene nanofluids

Experimental investigation and a mechanical model of critical heat flux in a narrow rectangular channel

Effect of Grooves on Nucleate Boiling Heat Transfer from Downward Facing Hemispherical Surface

The Effects of Surface Orientation, Heater Size, Wettability, and Subcooling on the Critical Heat Flux Enhancement in Pool Boiling

OpenFOAM CFD simulation of critical heat flux in vertical pipe under typically PWR conditions