Abstract:Formation of ice plays a key role in the behavior of concrete materials at low temperatures in cold and wet regions. The internal stresses generated during the freeze-thaw process could cause serious damage and other durability problems to concrete structures. However, just concerning the stage while the temperature is below 0 degrees C, ice could reduce the stress concentration in the porous matrix by filling the capillary pores and result in a significant increase of elastic modulus and strength, which is usually beneficial for concrete under mechanical loads (either static or fatigue). Meanwhile, pore pressures at low temperatures will also play an important role in either accelerating or delaying the microcracking. In order to establish a mesoscale approach [which usually treats concrete as a composition of coarse aggregate, mortar, and interfacial transition zone (ITZ) between them] based on the rigid-body spring method (RBSM) for the aforementioned issues, in the first stage, the ice-strengthened elastic properties of the mortar are estimated based on multiscale continuous micromechanics. Then a mesoscale model based on RBSM is developed to simulate the nonlinear mechanical behavior under uniaxial compression, tension, and splitting for concrete, in which the ice-strengthened elastic properties in mortar and ITZ, as well as the pore pressures caused by ice formation, are taken into consideration. The range and tendency of the simulated strength values agree well with experimental data. (C) 2017 American Society of Civil Engineers.

Effect of Supercooling on the Instantaneous Freezing Dilation of Cement-Based Porous Materials

A Study of the Behaviors of Cement-Based Materials Subject to Freezing

A Study Of Freezing Behavior Of Cementitious Materials By Poromechanical Approach

Elastic Behavior of Saturated Porous Materials under Undrained Freezing

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Influence of Freezing Rate on Cryo-Damage of Cementitious Material

Experimental Investigation of the Deformational Behavior of the Interfacial Transition Zone (itz) in Concrete During Freezing and Thawing Cycles

Numerical simulation of the freezing process of concrete

Quasi-Liquid Layer on Ice and Its Effect on the Confined Freezing of Porous Materials

CRYO-DAMAGE OF CEMENTITIOUS MATERIALS SUBJECT TO DIFFERENT FREEZING RATES

Influence of Freezing Rate on the Cryo-Deformation and Cryo-Damage of Cement-Based Materials During Freeze-Thaw Cycles

Freezing behavior of cement pastes saturated with NaCl solution

Temperature-Dependent Coefficient of Thermal Expansion of Concrete in Freezing Process

Effect of freeze–thaw cycles on the stress–strain curves of unconfined and confined concrete

Mechanisms of ice crystal growth in nanoconfined spaces of cementitious composites at low temperatures: Insights from molecular dynamics simulations

Freezing point depression and freeze-thaw damage by nano-fuidic salt trapping

Insight of Key Parameters in Freeze-Thaw Damage on the Performance of Cement-Based Materials: A Comparative Study with Rapid-Freeze Method

A Numerical Study on Chloride Diffusion in Freeze-Thaw Affected Concrete

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

Experimental Study on Mechanical Properties and Pore Structure Deterioration of Concrete under Freeze–Thaw Cycles