Abstract:In this study, discrete element PFC3D software was used to simulate the uniaxial compression of C30 concrete specimen models after freezing–thawing damage. Based on the thickness of the freezing–thawing damage layer of the concrete and the uniaxial compression test, the meso-parameters of cement mortar in concrete and the meso-parameters of weak interface between the cement mortar and coarse aggregate under different freezing–thawing cycles were calibrated. The axial compression deformation produced in the experiment was compared with the axial displacement of particles obtained by numerical simulation to verify the accuracy of the model and the selected meso-parameters. Based on the numerical model, the effects of freeze–thaw damage on the mechanical properties of concrete were studied from the perspectives of the contact force between particles, crack development, and concrete cracking, and the characteristics of meso-scale failure of concrete model after freezing–thawing damage were analyzed. The results show that the stress–strain curves obtained by uniaxial compression simulation in the PFC3D-based numerical model of freezing–thawing concrete are consistent with the test results. During the uniaxial compression process in the freezing–thawing concrete model, the contact force at different stage points between the particles, crack development, and the number of cracked concrete fragments quantitatively reflected the degree of meso-scale concrete failure. With increasing numbers of freeze–thaw cycles, the failure severity of the model increased with obvious penetrating cracks, which is consistent with the failure pattern obtained by physical experiments. Therefore, numerical experiments can be used to study the meso-scale failure modes of concrete.

Influence of Freezing Rate on the Cryo-Deformation and Cryo-Damage of Cement-Based Materials During Freeze-Thaw Cycles

Influence of Freezing Rate on Cryo-Damage of Cementitious Material

CRYO-DAMAGE OF CEMENTITIOUS MATERIALS SUBJECT TO DIFFERENT FREEZING RATES

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Numerical Investigation of the Effects of Freezing on Micro-Internal Damage and Macro-Mechanical Properties of Cement Pastes

A Study of the Behaviors of Cement-Based Materials Subject to Freezing

Temperature Field Distribution and Microstructure of Cement-Based Materials under Cryogenic Freeze-Thaw Cycles

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Change of the Coefficient of Thermal Expansion of Mortar Due to Damage by Freeze Thaw Cycles

Meso-Scale Mechanical Deterioration Of Mortar Subjected To Freeze Thaw Cycles And Sodium Chloride Attack

Experimental Study on Mechanical Properties and Pore Structure Deterioration of Concrete under Freeze–Thaw Cycles

Experimental Study and Mechanism Analysis on Frost Resistance of Normal Performance Concrete under Different Environments

Freeze-thaw Cycling Damage Evolution of Additive Cement Mortar

Degradation Law of Mechanical Properties of Concrete Subjected to Freeze-Thaw Cycles

EXPERIMENTAL RESEARCH ON DEFORMATION BEHAVIOR OF CONCRETE WITH DIFFERENT WATER CONTENTS AFTER CRYOGENIC FREEZE-THAW CYCLES FROM ROOM TEMPERATURE TO -190 ℃

Meso-Scale Failure of Freezing–Thawing Damage of Concrete under Uniaxial Compression

Investigation of pore structure and mechanical property of cement paste subjected to the coupled action of freezing/thawing and calcium leaching

Insight of Key Parameters in Freeze-Thaw Damage on the Performance of Cement-Based Materials: A Comparative Study with Rapid-Freeze Method

Influence of freezing and thawing cycle on mechanical properties of concrete

Influence of damage degree on the degradation of concrete under freezing-thawing cycles

Increased Strength and Related Mechanisms for Mortars at Cryogenic Temperatures