Abstract:Understanding the micro-catalytic porous combustion mechanisms is vital importance in improving the energy conversion efficiency of a combustion process. However, the investigation on this issue is still challenging due to the complex multiple physicochemical and thermal coupled transport mechanisms occurring in this process. In this work, a coupled lattice Boltzmann model is developed for modeling propane catalytic combustion process within a micro-catalytic porous combustor, in which the coupled transport mechanisms including multi-component gases flow, mass and heat transfers, as well as the heterogeneous catalytic combustion reaction are fully considered. Then, a systematic analysis regarding operating conditions and pore structure parameters was performed to disclose the micro-catalytic porous combustion mechanisms and dominated factors in determining the conversion efficiency. Results show that the conversion efficiency of propane in the micro-catalytic porous combustor majorly depends on the equivalence ratio, gas temperature and support materials properties. With an increment of the equivalence ratio, the conversion efficiency was improved firstly and then reduced, and an optimal combustion performance can be achieved where the equivalence ratio is equal to the chemical equivalent value. As the gas temperature increases, the conversion efficiency rises tremendously. To achieve a desirable combustion performance, the high gas temperature (> 700 K) should be maintained. Moreover, the support materials change the heat transfer and heat loss of the combustor, and the support materials with a low thermal conductivity or thermal diffusivity can reduce the heat loss and therefore enhance the conversion efficiency.

SIMULATION OF CATALYTIC COMBUSTION REACTOR OF VOLATILE ORGANIC COMPOUNDS AND CARBON MONOXIDE

Modeling and Simulation of Commercial Catalytic Reformers

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Kinetic Model and Simulation Analysis for Toluene Disproportionation and C9-Aromatics Transalkylation

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

Numerical Simulation of Temperature and Velocity Field in All-Oxygen Combustion

Numerical Simulation of Catalytic Combustion of CH4 in a Micro-burner

CATALYTIC COMBUSTION OF TOLUENE, PROPYLENE AND CARBON MONOXIDE AND KINETICS

Modeling the propane combustion process within a micro-catalytic porous combustor by using the lattice Boltzmann method

Numerical simulation of coke oven gas catalytic partial oxidation

Modeling, simulation and analysis of the liquid-phase catalytic oxidation of toluene

Computational modeling of oxy-coal combustion with intrinsic heterogeneous char reaction models

Effect of Surface Catalytic Reaction on Gas Phase Combustion Inside Miniscale Combustor

Temperature Fields in Automotive Catalytic Converters

Modeling for the Catalytic Coupling Reaction of Carbon Monoxide to Diethyl Oxalate in Fixed-Bed Reactors: Reactor Model and Its Applications

KINETIC MODELING STUDY OF FUEL-RICH PREMIXED TOLUENE FLAME AT LOW PRESSURE

Influence of Different Mechanisms and Models on Numerical Simulation Results of Gas Turbine Combustors

Numerical simulation of ammonia/methane/air combustion using reduced chemical kinetics models

Numerical Simulation of the Effect of CH4/CO Concentration on Combustion Characteristics of Low Calorific Value Syngas

Numerical Simulation of Cold-Start Emission for the Three-Way Catalytic Converter： Mathematical Model and Result Analysis

Simulation of Catalytic Distillation Process for Cumene Synthesis