Abstract:The underwater wet welding (UWW) technology is rapidly developing as a crucial method in the maintenance work of marine equipment and offshore platform. The rapid development of UWW technology has also exposed the problems to be solved urgently. Therefore, the influence of welding parameters on the weld appearance and welding spatters was investigated in this paper. The main welding parameters used in the study are welding current, arc voltage, welding speed and the contact tip-to-work distance (CTWD). Through the orthogonal test, it is found that, as each welding parameter increases within a certain range, the amounts of welding spatter decreases first and then increases, and the weld forming effect first becomes better and then deteriorates. The amount of wet welding spatter is mainly affected by the welding speed. When the welding speed is low, the splash is more, and the change of the welding current and the arc voltage has a little effect on the number of spatters. When the welding speed is large, the spatter is most with a small welding current and a large arc voltage. After evaluating the weld morphology obtained by welding under various parameters, a set of optimal parameters was obtained. The best parameters for the underwater wet welding of stainless steel with self-shielded flux-cored wire are determined to be 200 A-29 V-2.0 mm/s-15 mm (CTWD).

Method of Decreasing Spatter of Short-Circuit Transfer Welding

Achievements and Developments on Reducing Spatters in CO2 Arc Welding

Research of IGBT Inverter Low Spatter CO2 Welding Machine

Molten Droplet Size Control in Short-Circuiting CO2 Arc Welding

Effect of metal transfer mode on spatter and arc stability in underwater flux-cored wire wet welding

Parameter's influence of constraining transient state short current on short circuiting transfer

Characterization of spatter in underwater wet welding by X-ray transmission method

Research progress of low spatter CO2 welding technology

Analysis and control of short-circuit experience in short-circuit CO2 welding

Effective Control Approach on Molten Droplet Size in Waveform Controlled Short Circuit Co2 Arc Welding

Modeling and analysis of droplet forming in gas metal arc welding short circuiting transfer

Microstructure and Mechanical Properties of a Weld Seam from Magnetron High-Current CO2 Welding

Solutions to problems of tiny spatter and arc interruption in AC pulsed MIG arc welding

Instant Unstable Phenomenon of Rotational Spray Transfer in High-Current MAG Welding

Research on Droplet Size of Short-Circuiting Transfer in CO2 Gas-Shielded Arc Welding Based on High-Speed Photography

Study on Modeling and Simulation of Short Circuit Transfer of Inverter Arc Welding System

Mitigating spatters in keyhole-mode laser welding by superimposing additional ring-shaped beam

Effects of Pulse Arc on Droplet Transfer and Spatter of Laser Pulsed-Arc Hybrid Welding

Effect of Parameters Change on the Weld Appearance in Stainless Steel Underwater Wet Welding with Flux-Cored Wire

Effects of Arc Bubble Behaviors and Characteristics on Droplet Transfer in Underwater Wet Welding Using In-Situ Imaging Method

Numerical Simulation of Molten Droplet Shape and Electromagnetic Pinch Effect in Short-Circuit Co2 Welding