Abstract:The use of a self-compacting lower expansion concrete in a concrete-filled steel tube (CFST) structure not only promotes the quality of concrete pouring but also improves the bond behaviour between the steel and the concrete. In combination with the actual stress state of the columns in the engineering structure, it is necessary to study the eccentric compression behaviour of the column. In this study, experimental studies involving both uniaxial and biaxial bending tests of rectangular self-compacting lower expansion CFST columns were carried out. The variation laws of the load–displacement curves, the lateral deflection curves and the stress–strain curves during the loading phase were analysed. Furthermore, the failure modes and the mechanical properties of the specimens under eccentric compression loads were investigated. Subsequently, the numerical models of CFST columns with self-compacting lower expansion concrete were considered and established. In order to verify the rationality of the finite element modelling, the numerical calculation results were compared with test results. Then, a parametric analysis of the compression and the bending bearing capacities of each column was carried out by changing the eccentricity of the load, and the N–M curves or N-M x -M y surfaces describing the ultimate bearing capacity of the column were obtained. Finally, by the parametric finite element analysis of the rectangular CFST columns regarding to the bearing capacity under the same eccentricity, a conclusion was obtained: when the expansion agent content γ of a specimen increased from 0% to 10%, the bearing capacity of the columns increases significantly, but when continue increasing the expansive agent content, the expansion agent content has little effect on the compression–bending bearing capacity.

Study of Stress-Strain Relation of Concrete Filled Steel Tubular Eccentric Compression Column

Analytical Study of Circular Concrete-Filled Steel Tube Stub Columns under Axial Compression

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

STUDY OF BEARING CAPACITY AND COMPLETE STRESS-STAIN CURVES FOR CONCRETE FILLED SQUARE STEEL TUBE COLUMNS

Experimental Behaviour of Reinforced Concrete-Filled Steel Tubes under Eccentric Tension

Behavior of Eccentrically Loaded Large-Scale CFST Slender Columns with Latticed Annular Steel

Combined Axial and Flexural Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Global Stability Performance of Multi-Cellular T-Shaped CFST Slender Columns under Eccentric Compression

Experimental Study on Axial Compressive Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Performance of Concrete-Filled Steel Tubes Subjected to Eccentric Tension

Equivalent stress-strain models of components in high-strength concrete-filled circular steel tube columns

Eccentric Compression Performance of Core-Steel Tube with T-Shaped Steel Reinforced Concrete Column

Effect of initial stresses on steel tube on the behavior of concrete filled tubular columns with inner profiled steel subjected to eccentric loading

Eccentric Compression Properties of FRP-Concrete-Steel Double-Skin Square Tubular Columns

Behaviour of Concrete Filled-Steel Tubes under Axial Load

Axial Compressive Performance of Concrete-Filled Steel Tube Stub Columns with High-Strength Spiral Confined Concrete Core

Experimental Study on Concrete Filled Steel Tubular Columns under Combined Compression, Flexure and Torsion

Eccentric Compression Behavior of Truss-Reinforced Cross-Shaped Concrete-Filled Steel Tubular Columns

Eccentric compressive behavior of square concrete-encased concrete-filled double-skin steel tubular stub columns

Eccentric compression behaviour of rectangular concrete-filled steel tube columns with self-compacting lower expansion concrete

Passive stress-strain model and ultimate strength prediction for short steel tube confined concrete (STCC) columns allowing for size effect