Abstract:The application of centrifugal compressors is extensive in industries such as aerospace and energy. The blade is the primary factor affecting the aerodynamic performance of compressors. In this paper, the aerodynamic performance of a centrifugal compressor with leaned and bowed 3D blades is investigated. The spanwise section profiles of the blade in the circumferential direction are deflected at different angles, resulting in four compressors with distinct leaned and bowed 3D blades based on the original model. There is a significant change in isentropic efficiency of the modified models under design conditions. Specifically, models 1, 3, and 4 experienced an increase of 0.97%, 1.04%, and 0.79%, respectively, while model 2 experienced a decrease of 0.70%. The profile of the blade tip and 50% spanwise section are shifted towards the suction surface, resulting in a geometric structure where the blade is concave towards the pressure surface. This structure gradually lifts the flow from the blade root to the blade tip downstream to the outlet area of the flow channel, reducing the load on the trailing edge of the blade and making the flow more closely aligned with the blade. At the same time, the larger radial velocity gradient near the blade tip suppresses the backflow on the shroud side, making the flow at the impeller outlet more stable. The outlet velocity of the impeller is more evenly distributed along the spanwise and circumferential directions, which improves the flow at the inlet of the diffuser and enhances the efficiency of the diffuser. Due to the high spanwise height of the leading edge of the blade, this bowed blade structure has little effect on the spanwise curvature upstream of the blade, resulting in negligible influence on the flow of the upstream channel.

Numerical Research on Effect of 3-D Blade Surface Profiles on Aerodynamic Performance of Centrifugal Compressor Impellers

Optimization Design of Centrifugal Fan Impeller Based on Numerical Simulation.

Analysis of the Influence of Blade's Machining Error on Aerodynamic Performance of Impeller Based on NUMECA

Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor

Numerical Investigations on Effect of Streamwise Micro-Groove on Aerodynamic Performance of Ruled Surface Impeller

Investigation on Aerodynamic Performance of a Centrifugal Compressor with Leaned and Bowed 3D Blades

Numerical Studies on Application of Blended Blade and Endwall Technique on Transonic Centrifugal Compressor

EFFECT OF THE BLADE LEADING EDGE ON THE PERFORMANCE OF A CENTRIFUGAL COMPRESSOR

The influence of the trailing edge angle of the micro centrifugal impeller on the performance of the centrifugal compressor

Numerical simulation of the aerodynamics performance of swept and curved blade on the compressor stator

AERODYNAMICS OPTIMUM DESIGN OF BLADES IN CENTRIFUGAL COMPRESSOR

Numerical and Theoretical Investigations Concerning the Continuous-Surface-Curvature Effect in Compressor Blades

Numerical Study Of Impingement And Film Composite Cooling On Blade Leading Edge

Effects of Difference Leading Edge Shapes on Numerical Simulation of Centrifugal Compressor

Influence of Local Surface Roughness of Rotor Blade on Performance of an Axial Compressor Stage

Numerical Simulation and Optimization for Air Flow in an Impeller Blower

Numerical Study on the Compressor Aerodynamics Performance of Positive Curved Rotor Blade

Conversion from Free-Form Surface to Ruled Surface of Centrifugal Compressor Impellers

Influence of Geometrical Modeling on the Results of Numerical Prediction for the Centrifugal Compressor with Shrouded Impeller

Application of Complex 3D Aerodynamic Layout in Highly Loaded Compressor on Numerical Simulation

An Investigation on AerofoilShaped Blade Profiles for Centrifugal Turbines