Abstract:Due to the urgent demands for high-Curie temperature (T-C/T-m) piezoelectric materials in geothermal exploration, aerospace and related fields, high-T-C/T-m ferroelectrics have attracted booming research attention. The high-T-m 0.25Bi(Ni1/2Ti1/2)O-3-0.75 Pb(Zr1/2Ti1/2)O-3 (0.25BNT-0.75PZT) ceramics were prepared by solid-state sintering method and via partial oxalate route, where the 0.25BNT-0.75PZT ceramics prepared via the partial oxalate route exhibit better electrical properties (T-m = 232 degrees C (10 kHz), epsilon(m) = 10963, P-r = 26.14 mu C/cm(2), E-c = 15.61 kV/cm, d(33) = 521 pC/N, d(33)* = 553.3 pm/V, K-p = 47.1%, and Q(m) = 21.6). The nano-scale domain configuration of the ceramics was revealed by piezoelectric force microscopy (PFM), and the relationship between the micro-structure and macro-electrical properties was analyzed. The ferroelectric phase transition mechanism was studied by temperature dependent Raman spectroscopy. The reduction of energy barrier of lattice distortion and polarization deflection is caused by nanometer-sized domain structure, low symmetric polar nano-regions and/or coexistence of multi-ferroelectric phases, contributing to the excellent electrical properties of the 0.25BNT-0.75PZT ceramics prepared via the partial oxalate route.

Microstructure and Fatigue Properties of PbZr0.52Ti0.48O3 Ceramics

Non-destructive investigation of microstructure evolution due to ferroelectric fatigue in PLZT ceramics

Structural Contribution to the Ferroelectric Fatigue in Lead Zirconate Titanate (PZT) Ceramics

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Improving the Fatigue Endurance of Lead Zirconate Titanate Thin Films Through PbO Interfacial Modification

Internal friction study of Pb(Zr,Ti)O3 ceramics with various Zr/Ti ratios and dopants

Improvement of Electric Fatigue Properties in PLZT Ferroelectric Ceramics Due to SrBi2Ta2O9 Incorporation

Low-Temperature Phase Transitions of Pbzr0.52ti0.48o3

Microstructures and Pyroelectric Properties of Multicomposition 0.9PbZrO<sub>3</sub>·<i>x</i>PbTiO<sub>3</sub>·(0.1−<i>x</i>)Pb(Zn<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>Ceramics

Fabrication and Characterization of Bilayered Pb(Zr,Ti)O3-based Ceramics

Fatigue Suppression of Ferroelectric Pb1−xBax(Zr0.52Ti0.48)O3 Thin Films Prepared by Sol-Gel Method

Fatigue Characteristics of Pb(Zr0.3ti0.7)O-3 Thin Films Prepared by Metalorganic Decomposition

Effects of Pb Excess and Temperature on Polarization Fatigue in Sol-Gel Derived Pb(Zr0.3ti0.7)O3 Thin Films

Identification of Interfacial and Bulk Effects in Modulating Fatigue Behaviors of Pb(Zr0.52Ti0.48)O3 Thin Films

Enhanced Fatigue-Endurance of Ferroelectric Pb1−xSrx(Zr0.52Ti0.48)O3 Thin Films Prepared by Sol-Gel Method

Temperature-dependent Fatigue Behaviors of Ferroelectric Pb(Zr0.52Ti0.48)O3 and Pb0.75La0.25TiO3 Thin Films

Fatigue in Artificially Layered Pb(Zr,Ti)O-3 Ferroelectric Films

Growth and ferroelectric properties of sol-gel derived Pb(Zr,Ti)O3 using inorganic zirconium precursor

Internal Friction Study on Low-Temperature Phase Transitions in Lead Zirconate Titanate Ferroelectric Ceramics

Tailored Electrical Properties with Enhanced Fracture Toughness in Pb-0.99(Zr0.95ti0.05)(0.98)Nb0.02o3 Ferroelectric Ceramics