Abstract:During drilling in deep shale gas reservoirs, drilling fluid losses, hole wall collapses, and additional problems occur frequently due to the development of natural fractures in the shale formation, resulting in a high number of engineering accidents such as drilling fluid leaks, sticking, mud packings, and buried drilling tools. Moreover, the horizontal section of horizontal well is long (about 1500 m), and the problems of friction, rock carrying, and reservoir pollution are extremely prominent. The performance of drilling fluids directly affects drilling efficiency, the rate of engineering accidents, and the reservoir protection effect. In order to overcome the problems of high filtration in deep shale formations, collapse of borehole walls, sticking of pipes, mud inclusions, etc., optimization studies of water-based drilling fluid systems have been conducted with the primary purpose of controlling the rheology and water loss of drilling fluid. The experimental evaluation of the adsorption characteristics of "KCl + polyamine" anti-collapse inhibitor on the surface of clay particles and its influence on the morphology of bentonite was carried out, and the mechanism of inhibiting clay mineral hydration expansion was discussed. The idea of controlling the rheology and water loss of drilling fluid with high temperature resistant modified starch and strengthening the inhibition performance of drilling fluid with "KCl + polyamine" was put forward, and a high temperature-resistant modified starch polyamine anti-sloughing drilling fluid system with stable performance and strong plugging and strong inhibition was optimized. The temperature resistance of the optimized water-based drilling fluid system can reach 180 °C. Applied to on-site drilling of deep shale gas horizontal wells, it effectively reduces the rate of complex accidents such as sticking, mud bagging, and reaming that occur when resistance is encountered during shale formation drilling. The time for a single well to trip when encountering resistance decreases from 2-3 d in the early stages to 3-10 h. The re-use rate of the second spudded slurry is 100 percent, significantly reducing the rate of complex drilling accidents and saving drilling costs. It firmly supports the optimal and rapid construction of deep shale gas horizontal wells.

Study on the Solidification of Modified Drilling Fluid

Study of a strong inhibitory solid-free drilling fluid

Study on the Enhancement Mechanism of the Interface Cementing Strength of YLD-1 Oil/water Well Plugging Agent

Feasibility of integrated solidification and cementation of cementing fluid with mud cake from multifunctional drilling fluid

Study of Retention of Drilling Fluid Layer on Annulus Wall during Cementing

MICROSTRUCTURE FORMATION AND INVALIDATION MECHANISM OF SEALANT IN THE SIMULATED ENVIRONMENT AT THE BOTTOM OF OIL-WELL

Experimental Optimization of High-Temperature-Resistant and Low Oil—Water Ratio High-Density Oil-Based Drilling Fluid

Experimental Study on the Compressive and Shear Mechanical Properties of Cement–Formation Interface Considering Surface Roughness and Drilling Mud Contamination

Acid-Soluble Drilling Fluid in the Northern Carbonate Reservoir of the Yishan Slope in the Ordos Basin

Ultra-Low-Density Drilling Fluids for Low-Pressure Coefficient Formations: Synergistic Effects of Surfactants and Hollow Glass Microspheres

Optimization of High Temperature-Resistant Modified Starch Polyamine Anti-Collapse Water-Based Drilling Fluid System for Deep Shale Reservoir

Development of Water-Based Drilling Fluid in Mitigation of Differential Sticking Tendency

Experimental investigation of a new weak-gel-type clay-free and water-based drilling fluid with high-temperature and high-salt resistance for determining its optimized formulation

Study on the solidification of oily sludge

Research and Application of New Technology of Bionic Enhanced Wellbore and Strong Lubrication Water-Based Drilling Fluid

Development and Application of a Novel Nano-Micron Plugging Agent with Core-Shell Structure for Oil-Based Drilling Fluids

Study on Reasonable Amount of Flushing Fluid and Flushing Time

A Solidified Controllable Resin System Suitable for Fracture Cavity Formation Plugging and Its Performance Characterization

Wellbore Stabilization Technology for Fractured Formation in Shunbei No.5 Fault

Study on the mechanical properties and microstructure of a rich-watered grouting material

Experimental research on mechanical performance of grouting plugging material with large amount of fly ash