Experimental investigation of a new weak-gel-type clay-free and water-based drilling fluid with high-temperature and high-salt resistance for determining its optimized formulation

Zhijun Li,Chaogang Xiang

DOI: https://doi.org/10.1080/15567036.2020.1763516

2020-05-13

Abstract:In this study, based on a viscosity and gel-strength improving agent synthesized in a laboratory, a weak-gel-type clay-free and water-based drilling fluid was developed experimentally to optimize the selection of filtration loss reducer, inhibitor, plugging agent, and lubricant. Performance evaluation tests demonstrated its stable performance at temperatures up to 160°C and salt contents up to 30%. In addition, it exhibits excellent inhibition and lubricity; the rolling recovery rate of cuttings is as high as 93.6%, and the extreme pressure lubrication coefficient is as low as 0.07. The internal network structure of the weak-gel-type clay-free and water-based drilling fluid under different temperatures and salt contents was investigated through environmental scanning electron microscopy. Results showed that its microstructure comprises a three-dimensional network, in which sol particles are wrapped or embedded at the network structure nodes. Its network density and skeleton became thinner as temperature increased, whereas they became coarse and loose as the salt content increased. However, it still maintained a three-dimensional network structure at temperatures up to 160°C and salt contents up to 30%, which enable it to exhibit a unique rheological property. Results of this study provide a new drilling fluid technique for multilateral and horizontal well drilling operations in high-temperature and high-salt environments.