Realization of Communication Between PLC and PC

云忠,张材,谭建平

DOI: https://doi.org/10.3969/j.issn.1001-2257.2001.05.022

2001-01-01

Abstract:This paper on the base of the applicotion of simens S7300 series PLC introduce the hardware configuration and the control program design of serial communication between PLC and PC.

What problem does this paper attempt to address?

Implementation of Serial Communication between PLC and Single-chip Microcomputer

Cheng Liang,Lin Bin,Cha Lingzhi

DOI: https://doi.org/10.3969/j.issn.1000-3886.2006.03.013

2006-01-01

Abstract:This paper introduces serial communication between PLC and single-chip microcomputer with the example of S7-226 PLC and AT89S51 MCU.Detailed explanation of hardware configuration and program design in this communication system is given.The design project in paper has been applied successfully in automatic pill-filled machine.
The Design and Realization of PLC Remote Monitoring and Diagnosing System

韩思亮,汤建新,马皓

DOI: https://doi.org/10.3969/j.issn.1000-0682.2005.01.007

2005-01-01

Abstract:This paper introduces PLC remote monitoring and diagnosing system based on a new network method of linking serial server.It also puts emphasis on the communication principle to host computer,realtime communication and the design of freeport communication and center server.
Design of TCP/IP Network Communication between Host Computer and PLC Based on Serial Server

Tang Jianxin,Ma Hao

DOI: https://doi.org/10.3969/j.issn.1000-3886.2005.05.017

2005-01-01

Abstract:This paper introduces the Network communication between host computer and PLC based on a new method of linking serial server,the communication principle to host computer and the design of freeport communication.The communication protocol uses a new mode which combines query mode and real time mode and index address which realizes the alterable length of data frame.
Implementation of Serial Communication between S7-200 PLC and Computer Based on Free Port Mode

LIU Le,WANG Chang-song,WANG Xing-bing

DOI: https://doi.org/10.3969/j.issn.1672-6413.2007.04.008

2007-01-01

Abstract:How to implement serial communication between S7-200 PLC and computer based on free port mode was described in detail in the paper.The content of the communication protocol and the method of implementation were analyzed,and the programming instance was given.
Research based on CP5611WINCC and PLC communication

Zhou Hua,Deng Wen-jing,Zhou Jian-ying

DOI: https://doi.org/10.3969/j.issn.1001-9227.2012.03.017

2012-01-01

Abstract:In this paper,the communication between the PC configuration software WINCC and S7-300 PLC is realized through CP5611 card,and the specific method and procedure to establish the connection are introduced.
The Application of Multifunctional HMI and PLC in Control System of Beer Fermentation

肖杰,杨丽明,施丽莲,周泽魁

DOI: https://doi.org/10.3969/j.issn.1009-0134.2003.11.010

2003-01-01

Abstract:The application of multi-panel MP270 and S5/S7 PLC in the beer fermentation control, system is introduced in this paper with detailed explanation of hardware configuration and program design. Some tricks in software design and the communication approaches between S5 and S7 systems are presented in addition. This system has been in good condition since early 2002 till now.
The Communication Design of PLC Industrial Control System Based on VB and Mitsubishi Programming Interface Protocol

WANG Xi-wang,SUN Xiao-hua,WANG Fu-shun

DOI: https://doi.org/10.2991/iccsee.2013.372

2013-01-01

Abstract:By analyzing the current serial communication, used in a popular monitor system composed of PC, GOT and PLC, introduced a new design and implementation plan of serial communication based on Vb and Programming Interface Protocol.System achieved the efficient, stable and reliable communication under simple attachment without any mitsubishi's special communication board.The communication applied mitsubishi FX series PLC programming interface protocol, no longer need to set up the D8120, simplified the PLC program; Under this protocol and based on VB6.0 development environment，write the serial communication program adapt to FX full series，the program make the PC can read/write the PLC soft equipment and forced ON/OFF directly.In the actual application, No matter accuracy and stability of communication were to achieve requirements of industrial control system.
Realization of serial communication between LabVIEW and S7-200PLC based on free-port mode

Fu Ping,Zhou Rui,Yin Hongtao

DOI: https://doi.org/10.3969/j.issn.1002-7300.2013.06.021

2013-01-01

Abstract:Because of the poor scalability,high cost and low precision of the configuration software used by host computer to communicate with PLC in the automation monitoring and control system,the serial communication between LabVIEW and S7-200PLC based on free-port mode is designed.This thesis defines a simple,safe and efficient communication protocol based on the characteristics of the free-port mode of S7-200PLC.According to the communication protocol,this thesis designs the communication program for LabVIEW and S7-200PLC and realizes the data acquisition and I/O functions of S7-200PLC.This design is applied to the design of the automation monitoring and control system of a sewage treatment plant and offers efficient,real-time monitoring and control.
PLC Control System Design of Large Hydraulic Equipment

XU Xiaodong,GONG Guofang,LI Xilian,YANG Huayong

DOI: https://doi.org/10.3969/j.issn.1001-3881.2008.03.049

2008-01-01

Abstract:PLC control system has been widely applied in industrial control for its excellent performance and high reliability,particularly in the sequential control process. Building steps of S7-300 PLC and programming/debugging process of software STEP7 were introduced with the project background of a large hydraulic equipment. Advantages such as simple design,convenient programming,reliable running and so on were indicated in the actual implementation of the PLC system.
The application of S7-226 PLC in rotary counting and bottle-filled machine

程亮,林斌,庄可,查凌志

DOI: https://doi.org/10.3969/j.issn.1009-0134.2004.09.017

2004-01-01

Abstract:The application of S7-226 PLC in rotary counting and bottle-filled machine is introduced in this pager with detailed explanation of working principle. The hardware configuration and program design in this system is presented in addition.
Study on the Real-Time Serial Communication Based on Windows

陈月斌,邬义杰,刘楚辉

DOI: https://doi.org/10.3969/j.issn.1001-2265.2003.12.003

2003-01-01

Abstract:Aiming at the real-time property of serial communication between upper and lower computer of distributed control system under Windows, based on the study on VxD work characteristic and the mechanism of serial communication, this paper describes the programming method of real-time serial communication,by using VtoolsD tool, which is good solution to the key technology of developing control system of precision machining.
The implementation and application of programming port communication between industry PC and Mitsubishi FX series PLC

Sun Jian,Lu Peng,Fu Yaqiong,Liu Ruixiang,Chen Le

DOI: https://doi.org/10.1109/ISKE.2008.4731136

2008-01-01

Abstract:In this paper, a programming port communication protocol of Mitsubishi FX series PLC is introduced and studied. A part of communication program based on LabVIEW is presented. The serial communication between PLC and industry PC (host computer) is implemented, which is a simple hardware structure and quite practicable. This communication has been applied successfully in the supervisory system which is introduced in this paper. It has substituted for the configuration software and also realized the data supervision through the host computer. WhatÂ¿s more, the advantage of high efficiency and low price by using this communication is doomed to win great favor.
Communication Between PC and PLC Based on FX Programme Port

漆海霞

DOI: https://doi.org/10.3969/j.issn.1001-182X.2009.02.012

2009-01-01

Abstract:This paper introduces the communication between PC and PLC by using FX-series PLC programme port,and introduces the communication protocol,the communication demand,the data data frames format of communication transmission,the ac- cessing address code of PLC element, the calculation of check sum.The communication program based on VB6.0 develop- ment software under the Windows environment.
Application of OPC to Realize the Communications Between WinCC and Master-Slave PLC in the PROFIBUS Network

Li Guoxin,Zhang Wanli,Wang Lirong

DOI: https://doi.org/10.1109/bdcloud.2015.22

2015-01-01

Abstract:Network is the direction of development for industrial control, application of PROFIBUS-DP network consisting of S7-300 PLC S7-200 PLC produced by Siemens is becoming more and more widely. WinCC is powerful PC monitoring configuration software, often need to read and write datum of master-slave PLC in the network. This paper discusses the method of direct communication between WinCC and master-slave PLC in the PROFIBUS network under the premise of not affecting communication between PLC in the network.
Serial Communication between the Device Based on Windows CE and PLC

LIU DONG,TAO TAO,MEI XUESONG

2007-01-01

Abstract:Windows CE has characteristics of small size, powerful function, high real-time performance. Hence Windows CE more and more appears in industrial mechanical and electronic products. The paper aims at the feature of technology and application of high grade digital paper cutter machine. Windows CE device, as upper computer, implements user functions and program logic, PLC (Programmer Logic Controller), as low computer, accomplishes electric and mechanical control, the upper and lower computers are communicated by serial communication. The real-time performance, stabilization, high efficiency of serial communication between upper and lower machine is required by the key to safe and reliable operation of the upper-lower computer structure. To solve the problem, this paper analyses the design of serial communicate under Windows CE with combination of feature of PLC communication. Propose the method of program design, program flow and protocol. And the long–team performance of digital paper cutter machine demonstrates the reliance and feasibility of the program design.
Serial Communication Design of Industrial Control System Based on Visual Basic6.0 and MX Software Package

Xiao Hua Sun,Li Yan,Zhi Yong Zhang,Fu Shun Wang

DOI: https://doi.org/10.4028/www.scientific.net/amr.765-767.1943

2013-01-01

Advanced Materials Research

Abstract:By analyzing the current serial communication design used in a popular monitor system composed of PC, GOT and PLC, introduced a new design and implementation plan of serial communication based on Vb and MX software pagekage. This system could solve the problem of managing complex communication protocol in current application, and achieved the efficient, stable and reliable communication under simple attachment. The system could not only have not to consider complex communication protocol but also need not to set up the D8120 PLC, and MX Component with other application such as GX Developer could use com port at the same time, so debug conveniently and programming high efficiency. In the actual application, No matter the accuracy and stability of communication were to achieve achieve industrial control system requirements.
Initialization of Communication Datum Between WinCC and S7-200 Series PLC

Ling-jian YE,Hong-zhao MA

DOI: https://doi.org/10.3969/j.issn.1000-3932.2007.05.011

2007-01-01

Abstract:The transmission of data associated to one address between host computer and PLC was just unilateral during communicating between WinCC and SIEMENS S7-200 series PLC which based on Profibus protocol via EM277 module.Introduced the structure of data transmission.Proposed two resolving methods:one was reading data from database using VB-Script,and the other was reading data from PLC when the host computer just starts through self-defined protocol.The merits and demerits of them were analyaed.
Controlling Multi Siemens Inverters by Using PC

吴一高,傅建中

DOI: https://doi.org/10.3969/j.issn.1001-4551.2001.05.064

2001-01-01

Abstract:The RS-485 communication protocols of the MicroMaster inverter,production of Siemens are presented.TurBo C is used to complete serial communication controlling between single industrial PC and multi inverters under DOS.The PC can measure the operating parameters of the inverters in real time.
Application of Siemens S7-300PLC in Assembly Line of Automobile Engine

Wang Tingting,Liu Gang

2005-01-01

Abstract:The thesis mainly introduces Siemens S7-300PLC application in assembly line of automobile engine.The control system employs profibus-DP to connect CPU to the long-distanceI/O.ET200S and ET200eco,to realize the communication.It also states the constitution of this control system and the realization of system's controlling functions.
Emulation Communication Software for Programmable Controller Control of the Mechanical Press

Shengdun ZHAO,Wuchao Yan,Erlang Wang,Chunyang Shang,Jinde Chen

DOI: https://doi.org/10.3321/j.issn:0253-987X.2001.05.018

2001-01-01

Abstract:The Programmable Controller(PLC) control of JA21－160 mechanical press is taken for an example of SIMATIC S7－200 CPU216 PLC.The necessity of computer emulation for the control process is described, and it is pointed out that the emulation software must have three main functions,which show the state of PLC I/O,monitor the running results of the PLC and emulate the movement of the crank link mechanism.It is pointed out that the correct communication between the PLC and the personal computer for emulation is utmost important.The emulation communication software is composed of two programs stored in PLC and personal computer respectively. The emulation communication for PLC control of mechanical press is correctly accomplished by applying free port protocol mode, using SMB30 and SMB4.5 control bytes in the PLC,setting “hardware board/mouse”,adding a set of variables to store control information and adopting MSCOMM communication control in Visual Basic 6.0,etc.The software has been applied to practice successfully.

Realization of Communication Between PLC and PC

Implementation of Serial Communication between PLC and Single-chip Microcomputer

The Design and Realization of PLC Remote Monitoring and Diagnosing System

Design of TCP/IP Network Communication between Host Computer and PLC Based on Serial Server

Implementation of Serial Communication between S7-200 PLC and Computer Based on Free Port Mode

Research based on CP5611WINCC and PLC communication

The Application of Multifunctional HMI and PLC in Control System of Beer Fermentation

The Communication Design of PLC Industrial Control System Based on VB and Mitsubishi Programming Interface Protocol

Realization of serial communication between LabVIEW and S7-200PLC based on free-port mode

PLC Control System Design of Large Hydraulic Equipment

The application of S7-226 PLC in rotary counting and bottle-filled machine

Study on the Real-Time Serial Communication Based on Windows

The implementation and application of programming port communication between industry PC and Mitsubishi FX series PLC

Communication Between PC and PLC Based on FX Programme Port

Application of OPC to Realize the Communications Between WinCC and Master-Slave PLC in the PROFIBUS Network

Serial Communication between the Device Based on Windows CE and PLC

Serial Communication Design of Industrial Control System Based on Visual Basic6.0 and MX Software Package

Initialization of Communication Datum Between WinCC and S7-200 Series PLC

Controlling Multi Siemens Inverters by Using PC

Application of Siemens S7-300PLC in Assembly Line of Automobile Engine

Emulation Communication Software for Programmable Controller Control of the Mechanical Press