Abstract:A miniaturized compact open-loop resonator fiber optic gyro (RFOG) prototype with main body size of about 10.4cm×10.4cm×5.2cm is reported, and a demodulation signal compensation technique is proposed, aiming to suppress the drift arising from accompanying intensity modulation induced by semiconductor laser diode (LD). The scheme of how to establish this miniaturized RFOG prototype is specifically stated. The linear relationship between the first-harmonic and second-harmonic demodulated signals respectively for the two counter propagating beams in the resonator is verified by theory and experiment, and based on this relationship, the demodulation signal compensation technique by monitoring the second-harmonic demodulated signal is described in detail. With this compensation technique, the gyro output stability under 1°/s rotation rate is effectively improved from 0.12°/s to 0.03°/s, and especially, an about 0.36°/s peak-to-peak fluctuation due to tuning current reset is significantly suppressed. A long term bias stability of about 4.5°/h in 1h for such a small-sized RFOG prototype is demonstrated, which is of the same magnitude as that of currently reported large-sized RFOG systems utilizing LD as the laser source as well.

Study on Stability of Output Power of SLD Used for FOG

Analysis on the Temperature Fluctuating of FOG′s Source

An Improved Temperature Compensation Circuit for SLD Light Source of Fiber-Optic Gyroscope

Research on the Mean-Wavelength Drift Mechanism of SLD Light Source in FOG

The application of low-noise DC-DC power source in fiber-optic gyroscope system

Study of Wavelength Temperature Stability of Multifunctional Integrated Optical Chips Applied on Fiber Optic Gyroscopes

Digital System Study Applied to Performance Detection of Optic Fiber Gyroscope

The Research Of Digital Close-Loop Depolarized Fog

Study on Digital Testing System of SLD Based on LabVIEW

Research on Polarization Parameters Testing System

The Controller of the Laser Source SLD in Fiber Optic Gyro

Temperature Characteristic and Control of the Light Source for Fiber Optic Gyroscope

Temperature control system for SLD optical source of FOCS

The Application of Intelligent Modelling System in Temperature Compensation of SLD Light Source

Improving the Scale Factor Thermal Stability of Resonant Fiber-Optic Gyroscopes by Tracking the Half-Wave Voltage of the Phase Modulator

A simple digital control system with field-programmable gate array for stabilization of CO2 laser output

Reduction of polarization-fluctuation induced drift in resonator fiber optic gyro by a resonator integrating in-line polarizers.

Stabilizing the Output Power of the All-solid-state Green Laser by Optoelectronic Feedback

A Miniaturized Compact Open-Loop RFOG with Demodulation Signal Compensation Technique to Suppress Intensity Modulation Noise

Improving Thermal Stability Of A Resonator Fiber Optic Gyro Employing A Polarizing Resonator

Improving Thermal Stability of a Resonant Fiber Optical Gyroscope Using Triple Closed Loops