Abstract:State-of-the-art polarimeter calibration is reviewed. Producing many quasi-random polarization states and moving/bending a fiber without changing power allows finding a polarimeter calibration where the degree-of-polarization reaches unity and parasitic polarization-dependent loss is small. Using a polarization scrambler/transformer and a polarimeter a device-under-test can be characterized. Its Mueller matrix can be decomposed into a product of a nondepolarizing Mueller-Jones matrix times a purely depolarizing Mueller matrix. Test polarizations may drift over time. With help of an optical switch the reference device can be measured against an internal reference path. Later, with possibly different test polarizations, the actual device-under-test is measured against the internal reference. Polarization drift and need for repeated reference device measurement are thus overcome. When a patchcord is inserted, connector PDL can be measured, provided that errors are calibrated away, again by fiber moving/bending. Experimentally we have measured PDL with errors <0.004 dB. This easily suffices to measure connector PDL, which is demonstrated. PDL >60 dB was measured when the device under test was a good polarizer. A 20 Mrad/s polarization scrambler with LiNbO3 device generates the test polarizations. The polarimeter can sample at 100 MHz and can store 64M Stokes vectors. During laser frequency scans Mueller matrices can be measured in time intervals as short as 5 us.

Research on Polarization Parameters Testing System

Theoretical and Experiment Research on Polarization Parameters Test System of Fiber-optic Gyroscopes

Analysis of the Distribution Characteristics of the States of Polarization Based on Improved Delaunay Triangulation Algorithm

Development of Method for Polarization Alignment of PANDA Polarization Maintaining Fiber

Alignment Technique for Polarization-Based Optical-Systems

Polarization Properties of Receiving Telescopes in Atmospheric Remote Sensing Polarization Lidars.

Measurement Instrument For All-Polarization Image Information Based On Electro-Optic Modulation

A polarimeter based on electric-optical material

Measurement of Polarization Mode Couplings in Polarization-Maintaining Fibers Based on White Light Interference

Application of Automatic Polarization Compensation in Testing System

Reducing Polarization-Fluctuation Induced Drift in Resonant Fiber Optic Gyro by Using Single-Polarization Fiber.

Traceable Measurement of High Polarization Extinction Ratio Based on Machine Vision

A Stable Spectrum Measurement Method Based on Polarization-Maintaining Fiber Interferometer

Polarization-Dependent Loss of Optical Connectors Measured with High Accuracy (<0.004 dB) after Cancelation of Polarimetric Errors

Interferometric measurement of polarization mode distribution in fiber

Technical Research on Crosstalk-Free Polarization Control Devices Used for Blue-Green Light Band

Research on Stability of Polarization in an All-fiber Position Determination System

A Novel Method of Automatic Polarization Measurement and Its Application to the Higher-Order PMD Measurement

High-speed polarization controller for all-fiber quantum communication systems

Suppressing Polarization Non-Reciprocity Error with Reverse Phase Modulation in Dual-Polarization Fiber Optic Gyroscopes.

A Polarization Multiplexing Interferometric Fiber Optic Gyroscope with Faraday Effect and Shupe Effect Compensation