Abstract:The 3D finite difference time domain (FDTD) method was employed to simulate the polarization characteristic of the tapered metal-coated optical fiber probe in the near-field optical. The Scanning Near-field Optic Microscopy (SNOM)'s applications would be extended by controlling the exit light's polarization of the optical fiber probe and analyzing the polarized light which passes through the sample. Uniaxial Perfectly Matched Layers (UPMLs) are used for the Absorbing Boundary Condition, and the Drude model is used to deal with the non-magnetic metal. The light intensity distribution near the optical fiber tip was calculated with linear-polarized incident light. A general relationship between the extinction ration and the probe varying with its relevant parameters has been found by means of making alternations on the aperture diameter(40nm-120nm), the cone angle(20 degrees-90 degrees), the thickness of metal film(50nm-150nm) and material(silver, aluminum) as well as the incident light wavelength(350nm-1000nm) and other parameters. The results show that the above multi parameters have produced a co-effect on the polarization characteristics of the optical fiber probe. Once the other parameters remain constant, the extinction ratio is increasing as the aperture diameter or metal film thickness increases. And the extinction ratio could be decreasing, increasing or fluctuant as the cone angle increases in the different conditions. Al's extinction ration usually is better than Ag's under the same conditions. The wavelength's impact should be linked to the metal's complex permittivity. Therefore, the results have positive significance to the design and application of the high extinction ratio fiber probe.

Traceable Measurement of High Polarization Extinction Ratio Based on Machine Vision

Development of Method for Polarization Alignment of PANDA Polarization Maintaining Fiber

Research on Polarization Parameters Testing System

Theoretical and Experiment Research on Polarization Parameters Test System of Fiber-optic Gyroscopes

Three measurement algorithms of PMF geometric parameters

Measurement of Polarization Mode Couplings in Polarization-Maintaining Fibers Based on White Light Interference

Alignment Technique for Polarization-Based Optical-Systems

Measurement of Distributed Mode Coupling in High Birefringence Polarization-Maintaining Fiber with Random Polarization Modes Exited

Polarization Maintain Fiber Couplers with Novel Transmission Characteristics

Polarization Extinction Ratio Measurement Optical Communication Systems

Investigation on the Data Processing Method for High-Precision Alignment of Pm Fibers

A polarimeter based on electric-optical material

Measurement Instrument For All-Polarization Image Information Based On Electro-Optic Modulation

Nondestructive Measurement Of Polarization Characteristics Of Fiber-Pigtailed Waveguide-Type Ring Resonators

Polarization Extinction Ratio Promotion in High-Power Linearly Polarized Fiber Lasers

Simulation and Experiment on Automatic Polarization Alignment of Fine Polarization Maintaining Fibers

Compact polarization transceiver module for fiber optic gyroscopes

Coaxial Adjustment in PMF Alignments

A Novel Method of Automatic Polarization Measurement and Its Application to the Higher-Order PMD Measurement

Performance Improvement on the Measurement of Electro-Optic Coefficients of Poled Polymers Using the Optical Fiber Mach-Zehdner Interferometer

Numerical Calculation Of Optical Probe'S Polarization Characteristics