Abstract:The prefabricated semi-rigid concentrically braced steel frame has always been the main form of residential steel structures, much work so far has focused on the earthquake-resistance performance of such structures. However, little attention has been devoted to systematic model testing, further effort is still required to explore the structural performance with experimental studies. Two semi-rigid concentrically braced steel frames were designed and tested to failure under reversed low-cyclic loading. The hysteretic curves, bearing capacity, energy dissipation capacity, ductility and stiffness degradation performance were studied in detail. Then the performance was compared to analyze the advantages and disadvantages of the two frames. The tests showed that the plastic deformation and damage were primarily concentrated at the braces, and the columns and semi-rigid connections exhibited hardly any plastic deformation. The specimens went through the elastic stage, elastic-plastic stage and failure stage during the tests. The results indicated the specimen with chevron braces has better seismic performance. The structure presents the characteristic of ductile failure on the whole. The steel frame and braces of the specimens cooperatively perform together so that the structure has two seismic fortification lines. The structure with chevron braces possesses an excellent bearing capacity, a high lateral stiffness, a reliable lateral-resistance performance and a strong energy dissipation capacity. In contrast, because of the premature fracture of the cross joints, the structure with X-shaped braces has a lower material utilization efficiency, which leads to a dramatic decrease in the bearing capacity and stiffness, as well as low ductility and a poor energy dissipation capacity.

Experimental study on bearing capacity and seismic behavior of large- span two- storied Vierendeel truss transfer structure

The model experimental research on rib-patterned large-span spatial cable-truss tensile structure with annular plane

An experimental study on large-span spatial cable-truss tensile structure model

Experimental Study on Construction Tension and Local Component Failure of Double Inner and Outer Latticed Shell String Structure

Model Designing and Static Experimental Study on Double Inner and Outer Latticed Shell String Structure

Experimental study on seismic behavior of assembled steel beam-PC column composite frames

Experimental study on cable-truss reinforced structure system under heavy load

Experimental Study on Seismic Behavior of Steel Frame with Prefabricated Reinforced Concrete Infill Slit Shear Walls

Quasi-static Testing and Networked Pseudo-Dynamic Testing on Fiber Reinforced Plastic Retrofitted Reinforcement Concrete Short Columns of Bridge

Seismic behavior of high strength concrete composite walls with embedded steel truss

Seismic Behavior of Pc Column and Steel Beam Composite Moment Frame with Posttensioned Connection

Field Measurement and Analysis of Long Span High-level Steel Truss Transfer Story Structure

Study on prestressed steel reinforced concrete structures subjected to bending moment

Experimental Study on Steel-Concrete Composite Transfer Frame

Experimental research on seismic behavior of concrete column with spatial steel frame subjected to low cyclic reversed load

Experimental Research on Seismic Behavior of Steel Reinforced Concrete Column-Steel Truss Beam Composite Joints

Test on Seismic Performance of Frame Structure of Steel Reinforced Concrete Beam and Steel-Tube Encased Concrete Column

Experimental study on failure mechanism of prestressed concrete T girder

Experimental study on seismic performance of a new transfer joint in the steel-concrete vertical hybrid structure

Experimental study on the seismic behavior of concentrically braced steel frames with extended end-plate bolted connections

Experimental Study on Members Performance of Tianjin Haihe Bengbu Bridge