Abstract:The steel Moment-Resisting Frame has been widely used in multi-storey and high-rise constructions, as it has many advantages over common structures, such as better aesthetics, better seismic performances with less weight and easy assemblage, etc. In the Northridge earthquake (1994) and the Kobe earthquake (1995), widespread and unpredicted brittle fractures were. found in welded steel beam-column connections. Research on seismic behaviors of beam-column connections became a worldwide research spot. This paper introduces the main research results on steel beam-column connections of the Research Section of Steel Structures and Glass Buildings of Tsinghua University during the last decade, including experimental studies and design suggestions on pure steel beam-column joints and composite joints.(1) In this paper, a series of 8 specimens containing 4types of connections such as dog-bone type, long slot type and enlarged-access-hole connections were tested by cyclic loads. The affects of the connection details were analyzed, and the seismic behaviors of these joints were studied based on tests.(2) In this paper, 8 Welded-Flange-Bolted-Web (WFBW) specimens with 4 types of access holes were tested by cyclic loads. The seismic behaviors of connections and the influences of access holes were analyzed, and some structural requirements were proposed.(3) A test of 4 composite joints with different access holes and reinforcement ratios under cyclic loading was conducted to investigate the moment resistances and seismic behaviors of composite joints. The failure modes and ductility characters of these specimens were concluded and the test results were compared with pure steel connections. The connection stiffness degradation and the energy dissipation capacity were also discussed. At last the design suggestion of the composite joints was proposed.(4) Another test of four composite joints with different reinforcement ratios and loading types was conducted in this paper. This test focused on the affects of material and loading types.Generally, these tests and the design theories provide an in-depth sight into the studies and design methodologies of the steel and composite connections. It will promote the use of the steel structures and composite structures in our nation.

Experimental Research on Seismic Behavior of Steel Reinforced Concrete Column-Steel Truss Beam Composite Joints

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Experimental Research on Seismic Behavior of Reinforced Concrete Column-to-Steel Beam Joints with Bolted End-plate

Experimental Evaluation of Steel Beam Bolted to Reinforced Concrete Column Connections

Experimental study on seismic behavior of assembled steel beam-PC column composite frames

Seismic behavior of high strength concrete composite walls with embedded steel truss

Experimental Research on End-plate Bolted Connection with Steel Beam and Reinforced Concrete Column

Experimental research on seismic performance of confined concrete filled tubular columns under cyclic loading

Seismic Behavior of Steel Reinforced Concrete Column–steel Truss Beam Hybrid Joints

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Experimental Study on the Seismic Performance of 3d Joints Between Concrete-Filled Square Steel Tubular Columns and Composite Beams

Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading

Experimental Research on Seismic Performance of Rigid Joint Between Steel Beam and Concrete Wall

Experimental Study on Seismic Behavior of High-Strength Concrete-Filled Steel Tube Composite Columns

Research on Shear Performance of Concrete-Filled Square Steel Tubular Column Connections

EXPERIMENTAL INVESTIGATION ON CYCLIC PERFORMANCE OF CFST COLUMN-RC BEAM JOINTS ENCLOSED BY REBARS

Performance of Concrete-Encased CFST Column-to-beam 3-D Joints under Seismic Loading: Analysis

Behaviour of Composite Joints with Concrete Encased Cfst Columns under Cyclic Loading: Experiments

Recent Experimental Research Advances On The Seismic Performance Of Joints In Multi-Storey And High-Rise Steel Structures

Seismic Performance of 3-D Steel Beam to Concrete-Encased CFST Column Joints: Tests

Experimental study on seismic behavior of laminated steel tube column-concrete beam joint with outer stiffening ring