Abstract:The numerical modeling of radiation and convective heat transfer through a double-chamber glass unit was carried out to substantiate the increase in the heat transfer resistance of this unit via the application of low-emission coatings to glass surfaces. In the space between the panes of a window without low-emission coatings, the amount of heat transferred via radiation exceeds the amount of heat transferred via thermal conductivity and convection. The question of the effect of low-emissivity coatings on reducing heat loss through a window has not yet been sufficiently studied. This problem is also not sufficiently reflected in the literature. In this regard, this paper presents the results of numerical simulation aimed at studying the effect of low-emissivity coatings on heat transfer through a double-chamber glass unit. Simulation is carried out by numerically solving a system of equations of fluid dynamics and energy for the air gap and glass. Boundary conditions of the fourth kind are set on the internal surfaces of the chambers, taking into account the radiation and conduction components of the total heat flux emanating from the glass. The results of modeling heat transfer through a glass unit with ordinary glass show that about 60% of the heat is transferred by radiation. Therefore, an effective measure to reduce heat loss through windows is to reduce the radiation component of the total heat flux by applying a low-emissivity coating to the internal surfaces of the glass unit. This allows for the reduction of the overall heat flux (and, accordingly, heat loss to the environment) by 20–34%, depending on the number of glass surfaces with such a coating.

Optical-thermal performance of single-silver low-e coated glass

Performance Improvement of Single-layer-silver Low-E by Oxygen Doping in Surface Si3N4 Layer

Preparation of multilayer coated glass with low-E and thermal insulation properties

The Research for Heat Insulation Property of Architectural Reflective Thermal Insulating Coatings

Regulating Monolayer Aligned Silver Nanowire Coatings for Energy-Saving Windows

Development of Low-E Energy-Saving Glass

Thermal performance and condensation risk of single-pane glazing with low emissivity coatings

Design, Fabrication and Energy-Saving Evaluation of Five-Layer Structure Based Transparent Heat Mirror Coatings for Windows Application

Transparent Thermal Insulation Coatings for Energy Efficient Glass Windows and Curtain Walls

Coating of glass with low reflection Si nanofilm

Thermal Response of Low-E and Float Glass Facades under Various Heating Rates

A Triple-layer Glass-coating for Low Emissivity and Photocatalytic Activity

A New Low-Emissivity Films Prepared by Magnetron Sputtering

Heat Transfer through Double-Chamber Glass Unit with Low-Emission Coating

Optical Properties Across the Solar Spectrum and Indoor Thermal Performance of Cool White Coatings for Building Energy Efficiency

Heavily Doped Si Film Prepared by Electron Beam Evaporation and Its Application in Low-E Glass

Heat transfer coefficient of architectural window with energy efficient coating

Thermal performance evaluation of glass window combining silica aerogels and phase change materials for cold climate of China

The Effects of Microstructure on Optical and Thermal Properties of Porous Silica Films

THE PHYSICAL PROPERTIES MEASUREMENT AND APPLICATION OF ENERGY-SAVING GLASS

Improving the Solar Cell Module Performance by a Uniform Porous Antireflection Layer on Low Iron Solar Glass