Abstract:Purpose The purpose of this study is to reveal the effect of nano-Al 2 O 3 particle addition on the nucleation/growth kinetics, microhardness, wear resistance and corrosion resistance of Co–P–xAl 2 O 3 nanocomposite plating. Design/methodology/approach The kinetics and properties of Co–P–xAl 2 O 3 nanocomposite plating prepared by electroplating were investigated by electrochemical measurements, scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Vickers microhardness measurement, SRV5 friction and wear tester and atomic force microscopy. Findings A 12 g/L nano-Al 2 O 3 addition in the plating solution can transform the nucleation/growth kinetics of the plating from the 3D progressive model to the 3D instantaneous model. The microhardness of the plating increased with the increase of nano-Al 2 O 3 content in plating. The wear resistance of the plating did not adhere strictly to Archard's law. An even and denser corrosion product film was generated due to the finer grains, with a high corrosion resistance. Originality/value The effect of different nano-Al 2 O 3 addition on the nucleation/growth kinetics and properties of Co–P–xAl 2 O 3 nanocomposite plating was investigated, and an anticorrosion mechanism of Co–P–xAl 2 O 3 nanocomposite plating was proposed.

Research Progress of Nanometer Particle Chemical Composite Plating

Applications of Nano-Powders in Electroless Composite Plating

Influence on (Ni-P) Electroless Composite Plating with Carbon Nanotubes

Developments and Applications of Electroless Composite Plating

Researching Status and Prospects of Electroless Ni-P-PTFE Composite Coatings

Composite Electroless Nickel-nano Al2O3 Coatings on Steel Substrate

Present Status and Development of Nano-Composite Coatings

Progress in Research of the Self-lubricating Nickel-based Composites by Composite Plating

Wear-resisting Performance of Nano-diamond Powder Composite Plating Layer and its Application

Technology for Ni-Al2O3 Composite Coating and Its Properties

Nano- Power Composite Coatings

Preparation and Characteristics of New Type Nanocomposite Powder

Research Advances of Electroless Plating of Nickel-phosphorus Alloy

Effect of nano-Al 2 O 3 particle addition on Co–P–xAl 2 O 3 nanocomposite plating electroplated on X65 steel

Preparation and properties of Ni/P/single-walled carbon nanotubes composite coatings by means of electroless plating

Preparation, Microstructure and Tribological Properties of Nano-Al2o3/Ni Brush Plated Composite Coatings

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Wear Property of Nickel Matrix Nano-Al2O3 Electro-plating Composite Coating in Lubricated Condition Containing Solid Particles

Progress in Tribological Properties of Nanocomposites

EFFECT OF NANO-PARTICLE CONTENT ON TRIBOLOGICAL PROPERTIES OF ELECTRO-BRUSH PLATED COMPOSITE COATING IN OIL CONTAINING ABRASIVE CONTAMINANT