Abstract:Tensile strength and fracture toughness are two essential material parameters for the study of concrete fracture. The experimental procedures to measure these two fracture parameters might be complicated due to their dependence on the specimen size or test method. Alternatively, based on the fracture test results only, size and boundary effect models can determine both parameters simultaneously. In this study, different versions of boundary effect models developed by Hu et al. were summarized, and a modified Hu-Guan’s boundary effect model with a more appropriate equivalent crack length definition is proposed. The proposed model can correctly combine the contributions of material strength and linear elastic fracture mechanics on the failure of concrete material with any maximum aggregate size. Another size and boundary model developed based on the local energy concept is also introduced, and its capability to predict the fracture parameters from the fracture test results of wedge-splitting and compact tension specimens is first validated. In addition, the classical Bažant’s Type 2 size effect law is transformed to its boundary effect shape with the same equivalent crack length as Koval-Gao’s size and boundary effect model. This improvement could extend the applicability of the model to infer the material parameters from the test results of different types of specimens, including the geometrically similar specimens with constant crack-length-to-height ratios and specimens with different initial crack-length-to-height ratios. The test results of different types of specimens are adopted to verify the applicability of different size and boundary effect models for the determination of fracture toughness and tensile strength of concrete material. The quality of the extrapolated fracture parameters of the different models are compared and discussed in detail, and the corresponding recommendations for predicting the fracture parameters for dam concrete are proposed.

Effect of Fracture Path on Fracture Energy of Concrete

A Mesoscopic Approach for the Size Effect on Fracture Energy of Concrete

Stochastic Fracture of Concrete Composites: A Mesoscale Methodology

A Fractal Model for Simulating the Formation of Microcracks in the Fracture Process Zone and A Theoretical Explanation of the Size Effect of the Fracture Energy of Concrete

Effect of Aggregate on Cracking Behaviours of Concrete in Mesoscopic Modeling

Experimental Study on Some Factors Affecting Fracture Property of Concrete

Fractal size effect model on fracture energy of concrete

Boundary Effect of Specimen on Fracture Energy in Concrete

Effect of Aggregate During Fracture of High Strength Concrete

Fracture Toughness And Microstructure Of Concrete At Early-Ages

EFFECT OF FRACTAL DIMENSION IN CONCRETE MESO-STRUCTURE ON ITS AXIAL MECHANICAL BEHAVIOR: A NUMERICAL CASE STUDY

Evaluation of Fracture Parameters of Concrete from Bending Test Using Inverse Analysis Approach

EFFECT OF COARSE/FINE AGGREGATE RATIO AND CEMENT MATRIX STRENGTH ON FRACTURE PARAMETERS OF CONCRETE

Fractal Characteristics of Corrosion-Induced Cracks in Reinforced Concrete.

DETERMINATION OF BOUDNARY EFFECT ON FRACTURE ENERGY OF CONCRETE

Determination of Fracture Properties of Concrete Using Size and Boundary Effect Models

Fractal Dimension of Concrete Incorporating Silica Fume and Its Correlations to Pore Structure, Strength and Permeability

Experiment Studies on Fracture Energy of Cement Paste and Mortar

Study on the Average Fracture Energy for Crack Propagation in Concrete

Effect of coarse aggregate size distribution on fracture toughness of concrete based on boundary effect model

Experimental Investigation of the Relationship between Surface Crack of Concrete Cover and Corrosion Degree of Steel Bar Using Fractal Theory