Abstract:This paper investigates the impact of in-situ release and sequestration of CO 2 on the compressive strength, volume of permeable voids, phase change, hydration reaction, and micro-morphology of cement mortars. Two Linde Type A (LTA) zeolites with micro-pore dimensions of 5 Å and 4 Å (i.e., LTA 5A and 4A zeolites) were employed as CO 2 carriers herein. The incorporation of 312 wt% plain LTA 5A and 4A zeolites increases the 1-day compressive strength of the mortars. However, the use of plain LTA 5A zeolite shows marginal contributions to the 7 and 28-day compressive strengths of the mortars, whilst using plain LTA 4A zeolite even deteriorates their 7 and 28-day compressive strengths. The micro-structural analyses reveal that the addition of LTA zeolites promotes the cement hydration and improves the mean chain length (MCL) of calcium aluminosilicate hydrates (C-A-S-H). Nevertheless, this introduces numerous weak points or even a porous structure to the cement matrix. In contrast, in-situ release of CO 2 via LTA zeolites significantly enhances the compressive strengths of the mortars at various ages, as this can further facilitate the hydration evolution and improve the MCL of C-A-S-H. Moreover, in-situ release of CO 2 brings an incremental content of calcium carbonates. The calcium carbonate contents in the specimens containing 12 wt% LTA 5A and 4A zeolites are increased by 5.3 wt% and 4.8 wt%, respectively. This leads to homogenous distributions of calcite with a grain size of 150600 nm. Thus, LTA 5A zeolite outperforms LTA 4A zeolite with regard to CO 2 uptake and the corresponding mechanical properties. This work presents in initial exploration into the application of porous pozzolanic materials in conjunction of CO 2 in cement-based materials.

Enhancement of CO2 Sequestration of Limestone by Modified with Attapulgite

Improvement of CO 2 Capture Performance of Calcium-Based Absorbent Modified with Palygorskite

Development of Carbon Capture Coating to Improve the Durability of Concrete Structures

Study on CO2 Absorption-Mineralization Characteristics of Mixed Amine Solution Coupled with CaO and Key Influencing Factors in Mineralization Process

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

Amine‐modified acid‐activated attapulgite as efficient and stable adsorbents for CO2 capture from flue gas

Experimental Study on Additive Enhanced Limestone Wet Flue Gas Desulfurization

Characterization of the enhancement effect of Na2CO3 on the sulfur capture capacity of limestones

Comparative investigation on CO2 uptake performance of limestone-derived sorbents with different supports synthesized by impregnated layer solution combustion method

Effect of additive on sulfur capture by limestone during coal gasification

Synthesis and Formation Mechanism of Limestone-Derived Porous Rod Hierarchical Ca-based Metal–Organic Framework for Efficient CO2 Capture

Calcined Attapulgite Clay as Supplementary Cementing Material: Thermal Treatment, Hydration Activity and Mechanical Properties

Effect of Chelator on Carbon Sequestration and Mechanical Properties of CO2-cured Cement Pastes with Different Pore Structures

Hydrated Lime-Enriched CO2 Sequestration Binders Reinforced by Polyvinyl Alcohol

In-situ release and sequestration of CO 2 in cement composites using LTA zeolites

Development of Ultrafine Mineral Admixture from Magnesium Slag and Sequestration of CO2

Morphological Changes of Limestone Sorbent Particles during Carbonation/Calcination Looping Cycles in a Thermogravimetric Analyzer (TGA) and Reactivation with Steam

Highly Stable and Recyclable Sequestration of CO 2 Using Supported Melamine on Layered-Chain Clay Mineral

Enhancement of citric acid on low-grade limestone wet desulfurization performance coupled with spray and partial bubble technology

The Effect of Acid Treatment on the Limestone for Calcium Looping Process

Increased Sustainability of Carbon Dioxide Mineral Sequestration by a Technology Involving Fly Ash Stabilization