Abstract:Abstract Carbon dioxide (CO2) is the main contributor to greenhouse gases that affect global warming. The industrial sector is the third largest producer of CO2 and the cement industry is one of the industries that consistently produces the most significant CO2 emissions. The cement industry produces 5–8% of global CO2 emissions. Several methods for reducing specific CO2 emissions have been reported in the cement industry, including calcium looping, which uses the reversible reaction between calcination [calcium carbonate (CaCO3) decomposition] and carbonation [CO2 capture by calcium oxide (CaO)]. This work investigates calcium looping employing limestone obtained directly from several cement factories in Indonesia to observe the carbon-absorption characteristics of limestone from different mining locations. The experiment was carried out using a tube furnace equipped with a controlled atmospheric condition that functions as a calciner and a carbonator. X-ray diffraction and scanning electron microscopy with energy-dispersive x-ray spectroscopy characterization were conducted to analyse the changes in the experimental samples. The results demonstrated that the reactor configuration was capable of performing the calcination process, which converted CaCO3 to calcium hydroxide [Ca(OH)2], as well as the carbonation process, which captured carbon and converted it back to CaCO3. Parametric analysis was performed on both reactions, including pressure, temperature, duration, particle size and reaction atmosphere. The results show that the limestone obtained from all sites can be used as the sorbents for the calcium-looping process with an average reactivity of 59.01%. Limestone from cement plants in various parts of Indonesia has the potential to be used as carbon sorbents in calcium-looping technology. With a similar CO2 concentration as the flue gas of 16.67%, the experimental results show that Bayah limestone has the maximum reactivity, as shown by the highest carbon-content addition of 12.15 wt% and has the highest CO2-capture capability up to >75% per mole of Ca(OH)2 as a sorbent. Similar levels of the ability to capture CO2 per mole of Ca(OH)2 can be found in other limestones, ranging from 14.85% to 34.07%. The results show a promising performance of raw limestones from different mining sites, allowing further study and observation of the possibility of CO2 emission reduction in the sustainable cement-production process.

The Effect of Acid Treatment on the Limestone for Calcium Looping Process

Comparison of the Properties of Natural Sorbents for the Calcium Looping Process

Effect of Doped Lanthanum and Aluminum Salts on Calcium Looping Cycle for CO2 Capture

Effect of Lime Addition to CaSO 4 Oxygen Carrier in Chemical Looping Combustion

The Calcium-Looping Technology for Co2 Capture: on the Important Roles of Energy Integration and Sorbent Behavior

Experimental analysis on calcination and carbonation process in calcium looping for CO2 capture: study case of cement plants in Indonesia

High-Temperature Attrition of Nano CaO-Based CO2-Reactive Adsorbents in the Calcium Looping Process

Calcium Looping Technology Using Improved Stability Nanostructured Sorbent For Cyclic Co2 Capture

Economical Assessment of Competitive Enhanced Limestones for Co2 Capture Cycles in Power Plants

CO2 Capture for Dry Reforming of Natural Gas: Performance and Process Modeling of Calcium Carbonate Looping Using Acid Based CaCO3 Sorbent

Recent Progress in Calcium Looping Integrated with Chemical Looping Combustion (Cal-Clc) Using Bifunctional CaO/CuO Composites for CO2 Capture: A State-of-the-art Review

Understanding Sulfation Effect on the Kinetics of Carbonation Reaction in Calcium Looping for CO2 Capture

Reactivation of calcium-based sorbent by water hydration for CO2 capture

Decrease in the Adsorption Capacity of Adsorbents in the High-Temperature Carbonate Loop Process for CO2 Capture

Characterization of the enhancement effect of Na2CO3 on the sulfur capture capacity of limestones

Development and performance of CaO/La2O3 sorbents during calcium looping cycles for CO2 capture

Experimental Investigation of Sulfation Phenomena in Calcium Looping Systems Integrated in Cement Plants

Integration of Carbonate CO2Capture Cycle and Coal-Fired Power Plants. A Comparative Study for Different Sorbents

Improved performance of modified CaO-Al2O3 based pellets for CO2 capture under realistic Ca-looping conditions

Comparative investigation on CO2 uptake performance of limestone-derived sorbents with different supports synthesized by impregnated layer solution combustion method

Effect of Support Material on Carbonation and Sulfation of Synthetic Cao-Based Sorbents in Calcium Looping Cycle