Abstract:Coal and electricity integration plays an important role in ensuring national energy security, but it still faces the challenge of carbon emission reduction. The development of in-situ CO 2 sequestration and utilization technology for pithead power plants is an effective way to achieve low-carbon and efficient utilization of coal power. The preparation of foam concrete for mining using CO 2 is a type of carbon capture, utilization, and storage technology featuring in-situ CO 2 sequestration and utilization in pithead power plants and mine filling and sequestration. The purpose of this study is to evaluate the basic performance and carbon sequestration potential of Portland cement-based CO 2 foam concrete (PC-CFC) as a mining material. In this study, PC-CFC was prepared through physical foaming and the carbonation pretreatment cement process. The influence of carbonation pretreatment time and CO 2 foam content on density, strength, and carbon sequestration of PC-CFC was investigated. The experimental results showed that carbonation pretreatment could enhance the stability of CO 2 foam in Portland cement and improve the CO 2 foaming performance. With the extension of carbonation pretreatment time, the extend of dry density reduction decreases from 16.6% to 0.8%. A 60 min–90 min of carbonation pretreatment can achieve the best treatment performance. Carbonation pretreatment and CO 2 foam can promote the degree of cement hydration, optimize the PC-CFC pore structure, and improve the compressive strength of PC-CFC. However, the PC-CFC material strength owing to the extended carbonation treatment time, which leads to well-developed vesicle distribution, has an overall decreasing trend. In addition, the 7 day (d) compressive strength of PC-CFC can reach more than 60% of the 28 d compressive strength, which has evident early strength characteristics. Extending the carbonation pretreatment time and CO 2 foam content increased the PC-CFC carbon sequestration that ranged from 61.0 kg/ton to 85.7 kg/ton. The dry density of the PC-CFC material was significantly and positively correlated to the 28 d compressive strength and negatively correlated to the amount of carbon sequestration. In the case in which the best carbon sequestration effects is achieved, a single filling of the working face end can store ∼3929.31 kg of CO 2 ; in the most economical condition, it can store ∼3642.79 kg of CO 2 . The conducted research provides new ideas for the low-carbon and green development of coal and electricity integration.

Hydrated Lime-Enriched CO2 Sequestration Binders Reinforced by Polyvinyl Alcohol

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

Development of Carbon Capture Coating to Improve the Durability of Concrete Structures

Microstructure Refinement of Calcium-Sulfate-aluminate and Portland Cement (CSA-PC) Hybrids with Accelerated CO2 Curing (ACC)

Use of hydrated cement pastes (HCP) as a CO<sub>2</sub> sponge

Early-age carbonation mitigation of SSC by CxS minerals: Mechanism and Performances

Enhanced Carbonation Curing of Cement Pastes with Dolomite Additive

CO2 sequestration of fresh concrete slurry waste: Optimization of CO2 uptake and feasible use as a potential cement binder

Carbonation of calcium sulfoaluminate belite binder: mechanism and its implication on properties

Experimental study on the macroscopic and microscopic properties of cement paste backfill after treatment with carbon dioxide carbonize filling slurries during the mixing process

Carbonation-hardening properties and ITZ microstructure of low-calcium CO2 sequestration binder mortar

Carbonated ground granulated blast furnace slag stabilising brown kaolin

Carbonation behavior of calcium silicate hydrate (C-S-H): Its potential for CO2 capture

Accelerated Mineral Carbonation Curing of Cement Paste for CO2 Sequestration and Enhanced Properties of Blended Calcium Silicate

Effect of carbonation and foam content on CO 2 foamed concrete behavior

Characteristics of CSH under carbonation and its effects on the hydration and microstructure of cement paste

Enhancing performance and sustainability of ultra-high-performance concrete through solid calcium carbonate precipitation

Effect of sodium dodecyl sulphate on the rheological and carbon sequestration properties of cemented paste backfill with CO2 injection

Effect of Chelator on Carbon Sequestration and Mechanical Properties of CO2-cured Cement Pastes with Different Pore Structures

Effect of Carbonation Treatment on the Strength and CO2 Uptake Rate of Composite Cementitious Material with a High Steel Slag Powder Content

Experimental Study on Carbonation Durability of Kaolin Strengthened with Slag Portland Cement