Development of NC Lathe System Used for Industrial Training

王洪刚,傅建中,程晓翔

DOI: https://doi.org/10.3969/j.issn.1001-3881.2004.12.039

2004-01-01

Abstract:On the basis of the description of NC training no wadays,the development of NC lathe system used for industrial training was intro duced,and the hardware structure and software structure of the system was expati ated.This system was applied in the NC training.

What problem does this paper attempt to address?

Development of Application Software of Open Numerical Control Shoe Last Machine Tool System

LI Xiaolei,HU Xuefen,JIN Tao,TONG Shuiguang

DOI: https://doi.org/10.3969/j.issn.1001-3881.2006.02.063

2006-01-01

Abstract:Based on industry PC and domestic GT400-SV multiaxis motion control card,a new open architecture numerical control shoe last machine tool was developed.The components of system hardware were proposed,and the structure of NC system application software was discussed.The software was designed and developed in the WINDOWS environment.Practicability and characteristics of open architecture were proved when shoe last machining on the control of the NC systems.
Development of Last NC Machine

CHEN Jian-liang,TONG Shui-guang,HU Yang-wu

DOI: https://doi.org/10.3969/j.issn.1001-3881.2005.11.004

2005-01-01

Abstract:The development method of last NC machine was researched.After analyzing the principle of last NC machining,general design of the whole machine was presented and the detailed realization method of each module was introduced.Based on these methods,a last NC machine was developed successfully.
Development of Machining Simulation Module of Open CNC

杨晓京,陈子辰,樊瑜瑾,李浙昆

DOI: https://doi.org/10.3969/j.issn.1001-3881.2004.10.049

2004-01-01

Abstract:The development of machining simulation module of open CNC was analyzed and its function structure was determined,the realizable technology was discussed,an example of running machining simulation module was illustrated.
Research and Development of a CNC System Based on NC+PC Architecture

CHEN Zhi-yu,QIN Xian-sheng,REN Song-tao

DOI: https://doi.org/10.3969/j.issn.1001-2265.2007.04.015

2007-01-01

Abstract:Based on Industry PC and Windows 2000 operating system,a CNC system was built.A PMAC(Programmable Multi-Axis Controller) was invited to act as the numerical controller.The CNC's operating software was programmed by visual C++ and MFC(Microsoft Fundational Class Library).And the numeric controller's power and the IPC's management capability was fully explored.This method was successfully introduced into a numerical controlled drilling milling machine tool.
Numerical control development of CA6140 lathe based on the open- CNC system

库祥臣,王润孝,祝巍,张光辉

DOI: https://doi.org/10.3969/j.issn.1001-2265.2004.08.047

2004-01-01

Abstract:The paper introduce the developing methods and steps of CA6140 lathe numerical control development.It also describe the globe framework of the task and the important role of the printer port played in the practice.
Design of the Hardware for Configuration Computer Numerical Control

陈疆,秦现生,顾学民,王妍

DOI: https://doi.org/10.3969/j.issn.1672-1616.2008.13.012

2008-01-01

Abstract:It presents the hardware research state of configuration numerical control and some concepts,compares the configuration NC with opening system,describes the constitution of CCNC hardware system.Based on the theory of configuration numerical control,it builds a set of the hardware device and makes this device as the control device of IBM7535 Industrial Robot.It tests the method of building CCNC hardware device,proves that the method is practicable.
Software design of numerical control system based on thread technique

王洪刚,傅建中

DOI: https://doi.org/10.3969/j.issn.1001-2265.2004.01.022

2004-01-01

Abstract:The characteristics of numerical control system are described in this paper,which introduces a numerical control system based on thread technique of PC,at the same times, analyzes the data structure of data disposed in the numer ical control machining and presents the algorithm. This system has been applied in the numerical lathe control system.
Study of Software and Hardware in Computer Numerical Control Engrave System

曾伟梁,王青松,傅建中,李建华

DOI: https://doi.org/10.3969/j.issn.1001-2257.2001.05.016

2001-01-01

Abstract:The author introduce the constituted sections of CNC engrave system, give its supporting and implement ways of software and hardware. It has been proved that the developed CNC engraving control system that can control the CNC engraving machine accurately and effectively is very successful by a great deal of practice, also is accepted by the market.
Design of Open Architecture CNC Configuration and Implementation

QU Yan,QIN Xian-sheng,JIANG Ming-ju,LIU Huan

DOI: https://doi.org/10.3969/j.issn.1672-1616.2011.01.010

2011-01-01

Abstract:In order to develope CNC individuation system rapidly and efficiently with low cost for meeting users' requirement,it puts software component technology and configuration into NC system.According to the configuration method of non-real-time and real-time,it designs the basic function component libraries to establish the open architecture controller,builds NC configuration model and verifies the instance.The result indicates that the method implementing configurable of open CNC system based on software component technology is feasible.
Research of CNC system of spinning machine based on main-subordinate unit

杨旭东,张飞库,谢昆,王洪生,苏媛媛

DOI: https://doi.org/10.3969/j.issn.1671-3133.2010.04.014

2010-01-01

Abstract:A computer numerical control system of spinning machine was constituted,which was based on C630 lathe for the control necessities of spinning machine.This system was used a two-level control module in which the industrial control computer is used as main computer and PLC as subordinate computer.The principle,the hardware disposition,and the software design of the CNC system are also introduced in detail.
A Virtual Machining Based Training System For Numerically Controlled Machining

Yao Yingxue,Li Jianguang,Liu Changqing

DOI: https://doi.org/10.1002/cae.20097

2007-01-01

Computer Applications in Engineering Education

Abstract:The development of numerically controlled (NC) machining training systems based-on virtual machining technology is presented for supporting training of trainee to acquire the theoretical know-how, practical skills, and the problem troubleshooting techniques on the usage of NC machines and NC programming. The architecture, underlying theoretical basis for the development of training system based-on virtual machining is described. Several digital NC machining training systems had been developed and are practiced in the authors' university and in a professional training center. (c) 2007 Wiley Periodicals, Inc.
Research on Construction of NC Machining Experiment Platform Based on STEP-NC

潘淑微,傅建中

DOI: https://doi.org/10.3969/j.issn.1001-4551.2008.06.005

2008-01-01

Abstract:For meeting the demand of NC machining experiment under the conditions of STEP-NC technology,the construction of new NC machining experiment platform based on STEP-NC was researohed.With design principle to guarantee openness,the hardware system and software system were put up.The results of the research denote that,the design principle of platform architecture and the implement techniques of each functional module are applicable and proper,and provide technological bases and references for new STEP-CNC system.
NC Transformation of lathe based on economical CNC system of HNC-21T

Meng Bi

Abstract:The level of NC machine tools have become an important indicator of the level of a country's machine building industry.The world's industrial countries have regarded the development of CNC technology as the strategic focus of the development of machinery industry.After analyzing the feature,function of controlling,and price of common CNC system which are used in transforma-tion of old lathe,this article elaborates one engineering practiced method of using economical CNC system to transformation the old lathe.After selecting of NC system,configurating,parameter setting,control circuit designing,and designing of mechanical parts including the feed system,spindle system,and turret,connecting mechanical and electrical parts to debug and test the function and performance of machine tools and the cutting precision.

Engineering
Development and Research of Simulation Experimental Platform for the Control System of NC Machine Tool

马昭,樊留群,张浩

DOI: https://doi.org/10.3969/j.issn.1001-3997.2008.03.058

2008-01-01

Abstract:The concept,System composing of Hardware-in-the-loop simulation are introduced.The simulation experimental platform of Hardware-in-the-loop simulation application in the control System for NC Machine tool is also analyzed.Software system of the platform and each object model of NC machine tool are put emphasis present.The practice indicates that it can effectively cut the development period of NC Machine tool,save the test expenditure and enhance the reliability and security of control system for NC Machine tool by applying the hardware-in-the-loop simulation to the control system for NC Machine Tool.
Study and development on virtual NC milling system

潘爱民,黄明吉,滕向阳

DOI: https://doi.org/10.3969/j.issn.1000-7024.2004.02.041

2004-01-01

Abstract:A virtual system based on virtual manufacturing technique and NC processing technique for NC milling is developed with Visual C++6.0. The control panel and mill bed of this system is similar to that of the real machine. This system can realize the 3D simulation of machining process and collision-checking during cutting process. It can check most of syntax errors in NC program to reduce the waste of resource and equipment and to raise the using ratio of NC machine.
Development of Opening Cutting NC System

Long You

2003-01-01

Abstract:It shows the development of NC cutting system based on Windows2000. The multi-arrangement, modularized and opening design methods are sufficiently used for this system. It gives the detail about the treatment and realization of some important modules such as slot compensation, velocity pretreatment and PLC.
Development of Semi-physical Simulation and Training System for CNC Machining

Jing Wu,Yingxue Yao,Jingguang Li

2009-01-01

Abstract:A semi-physical simulation and training system for CNC machining is developed to satisfy the demand of validating NC program before cutting and training NC machine tool operators. It can simulate the whole process of NC machining. It includes that inputting and editing of NC program,controlling the running of NC machine tools and NC machining process.
The Development of Virtual Machining System Based on Acis

J. Wu,Y. X. Yao,J. G. Li

DOI: https://doi.org/10.4028/www.scientific.net/amm.10-12.860

2008-01-01

Abstract:The NC machine tool is widely used in today's manufacturing industry. In this paper, a framework of the NC lathing dynamic simulation system is presented and the machining process simulation is developed based on the solid modeling method with ACIS geometric engine and 3D graphic display. The tool swept volume is designed and Boolean difference of the cutter swept volume with the raw stock in the system is calculated. The user or trainee can practice all operations, procedures and skills in complete safety, while maintaining a high degree of realism.
Development of NC System on Graphite Electrode Abrading Tool

韩权利,杨来侠,马宏伟

DOI: https://doi.org/10.3969/j.issn.1009-0134.2000.10.013

2000-01-01

Abstract:It introduces the principle of graphite electrode abrading tool and develops the software and hardware of NC machine. This can detect the position of platform feed with great inertial-mass through photoelectrical encoder, the vibration magnitude of translation worktable with eddy transducer. Based on these the machine parameters can be automatically regulate, and the grinding process is smooth.
Development of Laser Processing Oriented NC Auto-programming System

毛贵波,吕善进,王扬,任长君

DOI: https://doi.org/10.3969/j.issn.1002-2333.2003.12.004

2003-01-01

Abstract:In order to improve programming efficiency of laser processing NC system and reduce user artificial program ming errors,a laser processing oriented automatic programming system is developed with Visual C++6.0which picks up entity information from DXF files,generates optimized processing path,outputs and verifies the NC code,and then performs code simulation.The system with easy operation and friendly user interface proved to be practical.

Development of NC Lathe System Used for Industrial Training

Development of Application Software of Open Numerical Control Shoe Last Machine Tool System

Development of Last NC Machine

Development of Machining Simulation Module of Open CNC

Research and Development of a CNC System Based on NC+PC Architecture

Numerical control development of CA6140 lathe based on the open- CNC system

Design of the Hardware for Configuration Computer Numerical Control

Software design of numerical control system based on thread technique

Study of Software and Hardware in Computer Numerical Control Engrave System

Design of Open Architecture CNC Configuration and Implementation

Research of CNC system of spinning machine based on main-subordinate unit

A Virtual Machining Based Training System For Numerically Controlled Machining

Research on Construction of NC Machining Experiment Platform Based on STEP-NC

NC Transformation of lathe based on economical CNC system of HNC-21T

Development and Research of Simulation Experimental Platform for the Control System of NC Machine Tool

Study and development on virtual NC milling system

Development of Opening Cutting NC System

Development of Semi-physical Simulation and Training System for CNC Machining

The Development of Virtual Machining System Based on Acis

Development of NC System on Graphite Electrode Abrading Tool

Development of Laser Processing Oriented NC Auto-programming System