Abstract:High temperature REBCO superconducting tapes are very promising for high-field magnets. Under high magnetic fields there are high electro-mechanical forces, and thus concern for mechanical damage. Due to large screening currents and composite structure of the tape, the mechanical design of these magnets is not straightforward. In addition, many contemporary designs use insulated winding. In this work we develop a novel two-dimensional axisymmetric finite element tool programmed in MATLAB that assumes the displacement field within linear elastic range. The stack of pancakes and a large number of REBCO tape turns are approximated as an an-isotropic bulk hollow cylinder. Our results agree with uni-axial stress experiments in literature, validating the bulk approximation. Here, we study the following configuration. The current is first ramp up to below the critical current and we calculate the screening currents and the forces that they cause using the MEMEP model. As a case study, 32 T REBCO superconductor magnet, is taken and simulated numerically. We have done complete mechanical analysis of the magnet by including the axial and shear mechanical quantities for each pancake unlike previous work where only radial and circumferential quantities are focused. Effect on mechanical quantities without screening current is also calculated and compared. It is shown that including screening current induced field strongly affect the mechanical quantities, specially the shear stress. The latter might be the critical quantity for certain magnet configurations. Additionally, in order to overcome high stresses, a stiff over banding of different material is considered and numerically modelled which significantly reduces the mechanical stresses. The FE based model developed is efficient to calculate the mechanical behaviour of any general superconductor magnet and its devices.

STUDY ON THE COMPOSITE WINDING MECHANICAL PROPERTIES BY EXPERIMENT AND NUMERICAL SIMULATION

Magnet circuit design and optimization of giant magnetostrictive transducer

Mechanical Stress in Superconducting Coils During Winding Process

Finite Element Analysis of Superconducting Magnet Winding Pre-stress

Numerical analysis on the mechanical behavior of a 5T superconducting magnet

Numerical and Experimental Study for the Quench Propagation of A Test Superconducting Magnet

Magneto-Mechanical Coupling Analysis of a Superconducting Solenoid Using FEM With Different Approaches

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Effect of Pretension, Support Condition, and Cool Down on Mechanical Disturbance of Superconducting Coils

Study on the Stress of 500 Mhz Nmr Magnet Coils with Detailed Fe Model

Stress Analysis of a 7 T Actively Shielded Superconducting Magnet for Animal MRI

Numerical Analysis of Mechanical Behavior for a 9.4-T Whole-Body MRI Magnet

The Numerical Analysis of Force and Comparison of Pulse Magnet and Electromagnetic Forming Coil

Structure parametric optimization and mechanical analysis of the MSe1 septum magnet

Collaborative Simulation and Testing of the Superconducting Dipole Prototype Magnet for the FAIR Project

Thermo-mechanical Analysis of the Structure Components of 15 T Magnet in Super-X Facility

Finite Element Analysis Method for Electromagnetic Stress of Axisymmetric High Field Superconducting Magnet

Modelling the mechanics of 32 T REBCO superconductor magnet using numerical simulation

Numerical Study on Effective Thermal Conductivity of the Compacted Superconducting Magnet

Analytical methods to calculate electromagnetic stress of superconducting solenoid magnets

Numerical Study on Thermal Stability of No-Insulation Coils Using a Three-Dimensional Finite-Element Model