Abstract:Abstract Previous studies of test coils have demonstrated the high thermal and electrical stability of no-insulation (NI) high temperature superconducting (HTS) coils thanks to the presence of turn-to-turn current paths. These turn-to-turn current paths in a NI coil are significantly influenced by the contact resistivity. In practice, it is very challenging to measure the contact resistivity of a NI coil by direct experiments of short samples, since the contact resistivity of superconducting tapes is influenced by surface roughness and tolerance, stress, temperature etc. A proper simulation model is needed to investigate the contact resistivity of the NI coils with dedicated experiments. Hence, in this paper a distributed circuit model is employed. This model, implemented in Matlab 2018a, considers the local contact resistivity, self and mutual inductance, and HTS resistance, which depends on the supplied current, magnetic field and temperature. To validate the model, experimental results from literature, including sudden discharge, and charge–discharge processes, are employed and the results from simulations are consistent with experimental results. Then the model is used to investigate the equivalent contact resistivity of a 157-turn NI coil. Through the comparison of simulated and experimental results, it is found that the contact resistivity of the NI coil has an inhomogeneous distribution. When the current changes with different speeds, ramping rates or frequency, a different number of turn-to-turn contacts carries radial current. Since the turn-to-turn contacts have different contact resistivity, the equivalent contact resistivity calculated from sudden discharge cannot be used in simulations to reproduce all the experimental data.

Numerical Study on Effective Thermal Conductivity of the Compacted Superconducting Magnet

Large Thermal Conductivity and Robust Mechanical Properties of Ni-Mn-Ga/Cu Magnetocaloric Composites Prepared by Spark Plasma Sintering

Effect of thermal contact resistance on heat generation in conduction-cooled binary current lead

Numerical Study on Thermal Stability of No-Insulation Coils Using a Three-Dimensional Finite-Element Model

Exploration of the influence factors on contact resistance obtained from sudden discharge test on the large-bore metal-as-insulation REBCO magnet

激光等离子烧结 Ni-Mn-Ga/Cu 磁热复合材料的大热导率和强力学性能

Numerical Study of the Electromagnetic-Thermal Characteristics During the Charging Process of Ultra-high Field HTS Insert Magnet

Electromagnetic, stress and thermal analysis of the Superconducting Magnet

Three-dimensional simulation of the coupled electromagnetic-mechanical responses in a no-insulation racetrack coil

Numerical Simulation of Magnetic Field for Compact Electromagnet Consisting of REBCO Coils and Iron Yoke

Electromagnetic-thermal modeling of high-temperature superconducting coils with homogenized method and different formulations: a benchmark

Analysis of mechanical behavior in inhomogeneous high-temperature superconductors under pulsed field magnetization

Study of contact resistivity of a no-insulation superconducting coil

Two Quenched Models for High-Temperature Superconducting Insulated Coils

Fast evaluation of the critical current of high-temperature superconducting coils based on the integral method

THE CURRENT LEADS AND THEIR ELECTRICAL INSULATION & THERMAL CONDUCTION FOR 35kJ SMES

AC loss and thermal analysis of a curved DCT super-conducting magnet for carbon ion therapy

An Advanced Computational Approach for Evaluating Screening-Current-Induced Strain in REBCO HTS Coils Considering Electromagnetic-Mechanical Coupling

Analysis of experimental conditions for simultaneous measurements of transport and magnetotransport coefficients of high temperature superconductors

AC Magnetic Susceptibility: Mathematical Modeling and Experimental Realization on Poly-Crystalline and Single-Crystalline High-Tc Superconductors YBa2Cu3O7−δ and Bi2−xPbxSr2Ca2Cu3O10+y

Numerical Investigation on Transverse Heat Transfer Properties in Cross Section of Full Size Nb3Sn CICC ITER Conductor