Abstract:The elastoplastic mechanical behaviour of an epoxy-impregnated REBCO pancake winding under cryogenics and high magnetic field is investigated in the frame of finite element (FE) modelling. A two-dimensional axisymmetric electromagnetic-thermal-structure multi-physics multi-layer FE model with main layers of the coated conductor and insulation materials is developed. The radial stress and hoop stress on each constituent layer induced by thermal mismatch stress during cooling are investigated. The mechanical behaviour of each constituent material is also analysed by considering the thermal mismatch stress and electromagnetic force under 20 T background field. The results show that discrete stresses appear in all the constituent materials indicating that the multi-layer winding model containing the main constituent materials is necessary for the accurate stress analysis in an epoxy-impregnated REBCO winding. The stress of each constituent material induced by thermal mismatch during cooling process are too high to be ignored in the subsequent electromagnetic structure analysis. The mechanical-magnetic coupling analyses show that the stresses of all the constituent materials increase with the transport current. The plastic failure mainly induced by hoop stress successively occurs on copper stabilizer and Hastelloy substrate of the innermost turn, and the plastic region propagates from the inner turns to the outer turns with the increase of transport current. The failure of the superconducting layer occurs before the yield in Hastelloy due to the direct action of Lorentz force on the superconducting layers. The transverse tensile stress increases with the increasing transport current, indicating that the risk of transverse delamination failure increases with the increase of transport current. The mechanical failure modes including delamination within the conductor, plastic deformation in substrate and crack in superconducting layer should be seriously considered.

Mechanical Stress in Superconducting Coils During Winding Process

Finite Element Analysis of Superconducting Magnet Winding Pre-stress

Effect of Pretension, Support Condition, and Cool Down on Mechanical Disturbance of Superconducting Coils

Study on the Stress of 500 Mhz Nmr Magnet Coils with Detailed Fe Model

A STUDY ON THE STRESS DISTRIBUTION IN COIL WRAPPING AND ITS EFFECT ON FINAL COIL DEFORMATION

STUDY ON THE COMPOSITE WINDING MECHANICAL PROPERTIES BY EXPERIMENT AND NUMERICAL SIMULATION

Analytical methods to calculate electromagnetic stress of superconducting solenoid magnets

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

The Effect of Winding Conditions on the Stress Distribution in a 10.7 T REBCO Insert for the 25.7 T Superconducting Magnet

Relating Residual Stress and Microstructure to Mechanical and Giant Magneto-Impedance Properties in Cold-Drawn Co-based Amorphous Microwires

Magneto-Mechanical Coupling Analysis of a Superconducting Solenoid Magnet in Self-Magnetic Field

Magneto-Mechanical Coupling Analysis of a Superconducting Solenoid Using FEM With Different Approaches

Stress Analysis of Winding Process, Cooling Down, and Excitation in a 10.7 T REBCO HTS Magnet

Study on internal strain distribution of the high-field Nb3Sn superconducting accelerator magnets with homogenization theory

Stress Distribution Characteristics of Composite Wire-Paper Winding Structure under the Radial Electromagnetic Force

Numerical analysis on the mechanical behavior of a 5T superconducting magnet

Finite Element Analysis Method for Electromagnetic Stress of Axisymmetric High Field Superconducting Magnet

Magnetostriction-induced Stress in an Orthotropic Mechanical Thin High-Temperature Superconducting Disk Based on the Exponential Model of Critical State

The Numerical Analysis of Force and Comparison of Pulse Magnet and Electromagnetic Forming Coil

Electromagnetic-thermal-structure multi-layer nonlinear elastoplastic modelling study on epoxy-impregnated REBCO pancake coils in high-field magnets

Preliminary Mechanical Analysis of a 9.4-T Whole-Body MRI Magnet