Abstract:The irreversible model developed in this work was applied to calculate reactive residue curve maps (RRCMs) for a simple batch reactive distiller. This rigorous nonlinear modelling can describe the design and operation issues for a reactive distillation (RD) process better than equilibrium models because the interaction between mass transfer and chemical reaction is substantially complex. Methyl tert-butyl ether (MTBE) is the classic reference compound in the reactive distillation literature and thus was chosen for the case study in the present work. The irreversible model represented by differential–algebraic equations (DAE) was solved by the Runge–Kutta method for stiffness problems. Interesting phenomena are demonstrated with a case study for production of MTBE by a simple batch RD of the non-ideal mixture isobutene/methanol/methyl tert-butyl ether. The resulting complex nonlinear dynamics led to important results such as the phenomenon of dynamic azeotropy and multiplicity of steady states. The Damköhler number and operational parameters such as the interfacial area and vapor withdrawal flow rate can manipulate the topology of RRCMs. Relative to the equilibrium model, new distillation regions, new binary and ternary azeotropic points and new distillation boundaries (separatrices) were observed. The thermodynamic equilibrium model was demonstrated to be a limiting case of the proposed modeling which can be obtained by increasing the interfacial area or through decreasing the vapor withdrawal rate in the nonequilibrium model. The results obtained are useful for improving the design and the evaluation of batch RD columns.

NONEQUILIBRIUM MODEL OF SUSPENSION CATALYTIC DISTILLATION FOR ALKYLATION OF BENZENE AND C12 OLEFIN

Kinetic Model and Simulation Analysis for Toluene Disproportionation and C9-Aromatics Transalkylation

Simulation and Optimization of Linear Alkylbenzenes Distillation Process

Modeling and Simulation of Commercial Catalytic Reformers

A Comparative Study for Solution Methods of a Multicomponent Distillation Model

Modeling and Simulation Research onm-Xylene Oxidation Reactor

Kinetic Modeling of C2–C7 Olefins Interconversion over ZSM-5 Catalyst

Nonequilibrium model and parameter estimation on three-phase distillation in a packed column

Non-equilibrium Stage Model of Catalytic Distillation for Cumene Synthesis Using Low Concentration Propylene and Benzene

MODELING OF BATCH DISTILLATION STARTING FROM COLD STATE

Simulation of Catalytic Distillation Process for Cumene Synthesis

NON-EQUILIBRIUM MODEL BASED LARGE-SCALE PARAMETER ESTIMATION FOR THREE-PHASE DISTILLATION IN PACKED COLUMNS

Simulation for the Reactive Distillation Process to Synthesize Ethyl tert-Butyl Ether.

A Nonequilibrium Model for Distillation Processes

Dynamic Simulation of Butene Isomerization by Reactive Distillation

Hooke-Jeeves Method for the Process of Producing Isopropylbenzene by Catalytic Distillation

Research on Rigorous Mechanism Modeling for Distillation Column Series under Wide Variation of Feed Condition

Extractive Distillation of Hydrocarbons with Dimethylformamide: Experimental and Simulation Data

Kinetic Model of Olefins/Isobutane Alkylation Using Sulfuric Acid as Catalyst

Nonequilibrium dynamic modeling of a simple batch reactive distillation

Mathematical Modeling and Robust Multi-Objective Optimization of the Two-Dimensional Benzene Alkylation Reactor with Dry Gas