Abstract:The high chromium cast irons (HCCIs) with rare earth (RE) nanoparticles or inoculants were fabricated in the casting process. The phase compositions and microstructure were analyzed by X-ray diffraction (XRD) and optical microscopy (OM), respectively. The hardness and impact toughness were tested by Rockwel-hardmeter and impacting test enginery. And then, the morphology of fracture was researched by scanning electron microscopy (SEM). The results demonstrated that the phase compositions of HCCIs with addition of RE nanoparticles or inoculants which were M7C3 carbides + alpha-Fe did not change obviously. However, the prime M7C3 carbides morphology had great changes with the increase of RE nanoparticles, which changed from long lath to granular or island shape. When the content of RE nanoparticles was 0.4 wt.%, the microstructure of high chromium cast iron was refined greatly. The microstructure of carbides was coarser when the addition of RE nanoparticles was higher than 0.4 wt.%. The hardness and impact toughness of HCCIs were improved by addition of RE nanoparticles or inoculants. The impact toughness of HCCIs was increased 36.4% with RE nanoparticles of 0.4 wt.%, but the hardness changed slightly. In addition, the adding of RE nanoparticles or inoculants could reduce the degree of the brittle fracture. Fracture never seemed regular, instead, containing lots of laminates and dimples with the increase of the RE nanoparticles. The results also indicated that the optimal addition amount of the RE nanoparticles was 0.4%, under this composition, the microstructure and mechanical property achieved the best cooperation. In addition, through the study of erosion wear rate, when adding 0.4% RE nanoparticles into the HCCIs, the erosion wear rate got the minimum 0.32x10(-3) g/mm(2), which could increase 51.5% compared with that without any RE nanoparticles.

INFLUENCE OF RE ON SOLIDIFICATION STRUCTURE AND IMPACT TOUGHNESS OF CAST H13 STEEL

Influence of rare earth on solidification structure and impact toughness of cast H13 steel

Study on Heterogeneous Nuclei in Cast H13 Steel Modified by Rare Earth

Influence of Rare Earth Nanoparticles and Inoculants on Performance and Microstructure of High Chromium Cast Iron

Influence of RE Compound Modification on the Toughness of Casting High Speed Steel Die

Influence of Tungsten on Microstructure and Properties of As-Cast Hi-Cr Cast Iron

Effect of Ti and rare earth on microsegregation and large-sized precipitates of H13 steel

Investigations of Solidification Structures of High Carbon Alloy Cast Steel Containing RE-V-Ti

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

The Influence of Insertion Depth of Inorganic Materials on Solidification Microstructure and Segregation of 2.5-ton 42CrMo Ingot

Effect of Solidification Segregation on Microstructure and Mechanical Properties of a Ni-Cr-Mo-V Steel Weld Metal

Effects of Rare Earth Elements on Inclusions and Impact Toughness in a Weathering Steel

Solidification Structures of High Carbon Si-Mn Cast Steel with Modification

Effects of Foundry Variables and Refiners on Cast Structures of Superalloy K4169ii. Dendrite Structures and Granulation Mechanisms

Effects of RE/V/Ti Multi-Modification on Grain Refinement of High Silicon Cast Steel

Effect of RE-Al-N on Structures and Properties of M2 Cast High Speed Steel

Effects of Modified Inclusions and Precipitates Alloyed by Rare Earth Element on Corrosion and Impact Properties in Low Alloy Steel

Effects of Inoculation on the Pearlitic Gray Cast Iron with High Thermal Conductivity and Tensile Strength

Effects of Re and Ru on the Solidification Characteristics of Nickel-Base Single-Crystal Superalloys

Effect Of Rare Earth Metals On The Microstructure And Impact Toughness Of A Cast 0.4c-5cr-1.2mo-1.0v Steel

Influence of cerium treatment on inclusion modification and as-cast microstructure of high-strength low-alloy steel