Abstract:The microstructure characteristics of TiNi alloy were investigated to elucidate the active deformation mechanisms during hot rolling and the corresponding tribology performance. The deformation was mainly dominated by a combination of mechanical twinning involving the {114}B2 and {112}B2 twins, dislocations, and stacking faults during the manufacturing process. Moreover, various heat treatments were performed to differentiate the discrepancies in tribological behaviors of hot-rolled and heat-treated alloys. Hot-rolled microstructures with high defect density approximate to nanoscale precipitates through aging as the wear resistance of the alloy improves, albeit it is softer compared to the aged one. As demonstrated by the X-ray diffraction (XRD) results of the wear tracks, microstructures undergo the stress-induced martensitic (SIM) transformation during dry sliding. From differential scanning calorimetry (DSC) analysis, the martensitic transformation temperature is lowered by defects in the austenite phase. The activation of the SIM transformation can be a sluggish process owing to the effect of twinning, where both primary and secondary twins are involved. Furthermore, a reversible transformation that is related to pseudoelasticity causes a decrease in wear volume at room temperature, which is higher than the austenite finish temperature. Meanwhile, abrasive wear advances toward adhesion. Additionally, the hot-rolled sheet with γ fiber-{111}//ND (normal direction) exhibits better wear resistance compared to the sheet with α fiber-{100}//ND.

The Wear-resistance of TiNi Alloy and its Tribological Applications

Study On Tribological Characteristics Of Pseudoelastic Tini Alloys

Friction and Wear Resistance of Nanostructured TiNi Shape Memory Alloy

Tribological Performances of Molded Micro-Cratered Surface of Superelasticity TiNi Alloy

Tribology behaviors of Ti–Ni51.5 at% shape memory alloy with different microstructures and textures

A review of the tribology of nickel‐based superalloys

Influence of Residual Stress on the High-Temperature Tribological Performance of Nickel-Based Superalloy

Superelasticity in Tini Alloys and Its Applications in Smart Systems

Microstructure and Tribocorrosion Properties of NiTi/AlNi2Ti Ternary Intermetallic Alloy

Tribological behaviors of nanotwinned Al alloys

Friction and Wear Properties of Titanium Alloys and the Improving Methods

Fabrication self-recovery bulge textures on TiNi shape memory alloy and its tribological properties in lubricated sliding

Superelastic and Thermally Activated TiNi Alloys and their Applications in Dentistry

Tribological Behaviors of Electroless Nickel-Boron Coating on Titanium Alloy Surface

Enhancing the wear resistance of sintered WC–Co composite by adding pseudo-elastic TiNi constituent

The Precipitation Behaviors, Martensite Transformation and Superelasticity in the Aged Ni-rich TiNi Alloy with the Assist of Super-High Stress

Effect of hot rolling on microstructure and tribology behaviors of Ti−50.8Ni alloy

Enhanced wear resistance of Ni-Mo-TiN composite coating by synergistic effect of tough Ni-Mo matrix and hard TiN particles

Performance of TiNi Shape Memory Alloy on Suppressing Friction-induced Vibration and Squeal under Sliding Conditions

Tribological Properties of γ-TiAl Alloy Fretting against Nickel-Based Superalloy at Elevated Temperature

Tribological behavior of nanotwinned TiBN coatings