Abstract:Three different coatings, namely TiAlN, TiAlN (external)/NbN (internal) and NbN (external)/TiAlN (internal), were deposited on cemented carbides by arc ion plating. The comparative investigation conducted in this study elucidates the effect of the NbN layer and coating systems on the growth, mechanical properties, and tribological performance of the coatings. The results showed that the surface of the TiAlN and TiAlN/NbN coatings was smoother when TiAlN served as the external layer. The NbN/TiAlN coating, wherein NbN formed the external layer, had a much rougher but more symmetrical surface. With the introduction of the NbN layer, the increased micro stress induced a lower adhesion strength in the TiAlN/NbN and NbN/TiAlN coatings. The TiAlN/NbN and NbN/TiAlN coatings exhibited higher hardness and hardness/effective elastic modulus (H/E*). During the friction test, when the temperature was elevated to 700 °C, the tribological performance of the monolayer TiAlN coating was the lowest because of the TiO2-induced breakage of the dense tribo-oxide film. The NbN layer participated in the formation of a NbOx film at elevated temperatures, which was responsible for the high tribological performance of the two bilayer coatings. When the NbN layer was on the outermost layer and in direct contact with the elevated temperature atmosphere, the NbN/TiAlN coating generated a tribo-oxide film with high integrity, and its coefficient of friction decreased by 27% of that at room temperature. Therefore, the NbN/TiAlN coating exhibited the highest wear resistance at 700 °C.

Tribological behavior of nanotwinned TiBN coatings

Structure and tribological characteristics of nanocomposite Ti-B-N coatings

Microstructure and tribological properties of atmospheric plasma-sprayed TiO2 coatings reinforced by boron nitride nanosheets

Influence of Carbon Contents on the Structure and Tribocorrosion Properties of Tisicn Coatings on Ti6al4v

Tribological Characteristics of TiN and TiCN Hard Coatings Prepared by Pulsed D.C. Plasma Enhanced Chemical Vapour Deposition

Microstructure, Mechanical, and Tribological Properties of Cr-Ti-Si-N Coatings

Biotribological Properties of Ti-6Al-4V Alloy Treated with Self-Assembly Multi-Walled Carbon Nanotube Coating

ANALYSIS OF THE TRIBOLOGICAL PROPERTIES OF TiN/Si3N4 NANOCOMPOSITE COATING IN SLIDING CONTACT WITH CERAMIC, STEEL, AND POLYMER COUNTERPART

Enhanced wear resistance of Ni-Mo-TiN composite coating by synergistic effect of tough Ni-Mo matrix and hard TiN particles

Self-forming TiBN Nanocomposite Multilayer Coating Prepared by Pulse Cathode Arc Method

The Ti-B-N system: nanocomposite nc-TiN/a-(TiB2, BN) and nano-multilayer nc-TiN/a-TiBN thin films

TiNbN Hard Coating Deposited at Varied Substrate Temperature by Cathodic Arc: Tribological Performance under Simulated Cutting Conditions

Investigations on microstructure, mechanical and tribological properties of TiN coatings deposited on three different tool materials

Growth, mechanical properties, and tribological performance of TiAlN/NbN and NbN/TiAlN bilayer coatings

Network structured nano-TiB/Ti composites coating on Ti64 alloy with improved wear properties by direct laser deposition

Effects Of Wear Conditions On Tribological Properties Of Tib2-Tic/Ni Composite Coating By Plasma Cladding

Comparison of tribological properties of nitrided Ti-N modified layer and deposited TiN coatings on TA2 pure titanium

Tribological and mechanical behaviors of TiN/CNx multilayer films deposited by magnetron sputtering

Enhanced tribological performance of TiO 2 -hBN/CNT double-layer coating by CNT-assisted plasma electrolytic oxidation with nanoparticles addition

Enhanced Tribological Performance of TiO2-hBN/CNT Double-Layer Coating by CNT-Assisted Plasma Electrolytic Oxidation with Nanoparticles Addition

Tribological properties of Ni–P-multi-walled carbon nanotubes electroless composite coating