Abstract:The hot gas duct vessel (HGDV) is an important part of the high-temperature reactor pebble-bed module (HTR-PM) primary loop pressure boundary system. It connects the reactor pressure vessel (RPV) and steam generator pressure vessel. Because the dimensions of the HGDV are smaller than those of the other two vessels, it is often considered the weakest of the three vessels. Therefore, the safety of the HGDV has become one of the most important issues in the design of the HTR-PM. In the present paper, a comprehensive safety analysis of the HGDV in the HTR-PM was performed with an emphasis on the structural features. The designs of the HGDV and the support system of the primary loop pressure boundary are first described. A preliminary safety analysis of the HGDV, including the stress calculations and leak-before-break (LBB) analysis, is then presented. The results show that the stress levels of the HGDV under various accidents have a safety margin of at least 55.3% compared with the stress limits specified in American Society of Mechanical Engineers code, and the stress intensity factor at the postulated flaw is less than the critical stress intensity factor. The LBB analysis indicated that the leak detection system is capable of detecting leaks caused by a postulated through-thickness crack in the HGDV before it reaches the critical size. Although the preliminary analysis has proved the safety of the HGDV, the consequences of a hypothetical HGDV double-ended break accident were also studied to further investigate the safety features of the HTR-PM. Several mitigation measures were employed based on the original design. The structural integrity of the support system, the reactor internals, and the containment under double-ended break accident were evaluated. The results show that these main structures could maintain integrity under the HGDV double-ended break accident.

Stress Analysis of HTR-10 Steam Generator Heat Exchanging Tubes

Fatigue Analysis of Welded Joint at Tube-plate of Steam Generator in HTR-10

Stress and Seismic Calculation of HTR-10 Primary Loop Pressure Relief System (K417)

Analysis of the Structure Stability of the Hot Gas Tube in HTR-PM

Stress Analysis of Tube Box of Steam Generator

Safety Testing and Analysis of the Header of the Drawn Boiler with a Small Diameter and a Large Wall Thickness

Research Method and Two-Phase Flow Stability of the Steam Generator of HTR-10

Analysis and Calculation of Structure Strength of Hot Gas Duct in HTR-PM

Analysis of stress in reactor core vessel under effect of pressure lose shock wave

Safety analysis for hot gas duct vessel in HTR-PM

Experiment and Verification Test of the Once-Through Steam Generator of the 10 Mw High-Temperature Gas-Cooled Reactor Flow Stability of the Once-Through Steam Generator

Two Phase Flow Stability in the HTR-10 Steam Generator

Study on Stress Intensity of Welding Parts of Small Dlameter Tube to Reheater in Coal-burning Thermo-electric Factory with 200 MW Power

Discussion on Amount of Water Ingress Mass in Steam Generator Heat-Exchange Tube Rupture Accident of High-Temperature Gas-Cooled Reactor

Vibration and stability of helical pipes in HTR-10 steam generator

Design and Analysis on Supporting Structure of Thermal Insulation Layer in HTR-PM Steam Generator

Failure Analysis on Unexpected Fracture of the Hydraulic Expansion Mandrel for Tube to Tubesheet Expanding in the Steam Generator of Nuclear Power Plant

Experimental and Operational Verification of the HTR-10 Once-Through Steam Generator (SG): Heat-transfer and Hydrodynamic Features of the Once-Through Steam Generator

Experimental Study of Steam Generator Stability of 10MW High Temperature Reactor

ICONE23-2161 THERMAL-HYDRAULIC AND FLOW INSTABILITY ANALYSIS OF AN HTGR SUPERCRITICAL HELICAL TUBE STEAM GENERATOR

Numerical investigation on the thermal load heterogeneity of multi-assembly helical coil steam generator in high temperature gas-cooled reactor