Abstract:Ferroelectrics have recently attracted attention as a candidate class of materials for use in photovoltaic devices due to their abnormal photovoltaic effect. However, the current reported efficiency is still low. Hence, it is urgent to develop narrow-band gap ferroelectric materials with strong ferroelectricity by low-temperature synthesis. In this paper, the perovskite bismuth ferrite BiFeO3 (BFO) thin films were fabricated on SnO2: F (FTO) substrates by the sol-gel method and they were rapidly annealed at 450, 500 and 550 °C, respectively. The microstructure and the chemical state's evolution with annealing temperature were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS), and the relationship between the microstructure and electric, optical and photovoltaic properties were studied. The XRD, SEM and Raman results show that a pure phase BFO film with good crystallinity is obtained at a low annealing temperature of 450 °C. As the annealing temperature increases, the film becomes more uniform and has an improved crystallinity. The XPS results show that the Fe3+/Fe2+ ratio increases and the ratio of oxygen vacancies/lattice oxygen decreases with increasing annealing temperature, which results in the leakage current gradually being reduced. The band gap is reduced from 2.68 to 2.51 eV due to better crystallinity. An enhanced photovoltaic effect is observed in a 550 °C annealed BFO film with a short circuit current of 4.58 mA/cm2 and an open circuit voltage of 0.15 V, respectively.

Study on the Photovoltaic Effect in Porous BiFeO3 Films

The Microstructure, Electric, Optical and Photovoltaic Properties of BiFeO3 Thin Films Prepared by Low Temperature Sol⁻Gel Method

Effect of Substrates on the Structure and Optical Properties of Polycrystalline Bifeo3 Thin Films

Design of oxygen vacancy in BiFeO3-based films for higher photovoltaic performance

Photovoltaic Effect Induced by Self-Polarization in BiFeO3 Films

Improved Photovoltaic Effects in Mn-Doped Bifeo3 Ferroelectric Thin Films Through Band Gap Engineering

Thickness Dependence of Photovoltaic Effect in BiFeO 3 Thin Films Based on Asymmetric Structures

Photovoltaic Properties of Pt/Bifeo3 Thin Film/Fluorine-Doped Tin Oxide Capacitor

Dielectric and optical properties of BiFeO 3-(Na 0.5Bi 0.5)TiO 3 thin films deposited on Si substrate using LaNiO 3 as buffer layer for photovoltaic devices

Ferroelectric Properties of BiFeO3 Films Grown by Sol–gel Process

Visible-light photovoltaic effect in multiferroic Bi2Fe4O9 thin film

Photovoltaic Effect of a Bilayer Thin Film with (Na0.5bi0.5)1−xbaxtio3/bifeo3heterostructure

Photovoltaic Enhancement by Au Surface-Plasmon Effect for La Doped BiFeO3 Films

Photovoltaic Effect in Rhombohedral and Tetragonal Phase BiFeO3 Ferroelectric Thin Films

Photovoltaic, Photo-Impedance, And Photo-Capacitance Effects Of The Flexible (111) Bifeo3 Film

Effect of Top Electrodes and Light Sources on Photovoltaic Properties of Polycrystalline Bi4Ti3O12 Film

Structure and Ferroelectric Photovoltaic Effect Modulation in the Epitaxial BiFeO3/La0.5Sr0.5CO3 Heterostructures

Application of BiFeO3 thin films in Photovoltaic cells

Photovoltaic Effect of TiO2 Thick Films with an Ultrathin BiFeO3 As Buffer Layer

Enhanced Photovoltaic Properties in Polycrystalline BiFeO3 Thin Films with Rhombohedral Perovskite Structure Deposited on Fluorine Doped Tin Oxide Substrates

Photovoltaic effects in BiFeO 3