Abstract:Polyhexahydrotriazine (PHTs) films were prepared by polycondensation between the two aromatic diamine monomers and paraformaldehyde and then the thermal curing process. Those two aromatic diamine monomers were 4,4 '-diaminodibenzocrown ether (DACr) and 2,2-bis(P-aminophenoxy) ether (BAPE), which contained both flexible ether and rigid benzene ring structures. Through structural characterization and a variety of performance tests, including thermal performance analysis, tensile testing, contact angle, chemical resistance performance testing, and degradation performance testing, the effect of structural units of DACr and BAPE on the crosslinking structures formation and properties of polymer were investigated. The results show that the rigidity of the structural unit was related to the completeness of the cross-linked structure of the hexahydrotriazine (HT) ring and jointly determined the performance of the PHT film material. The PHT containing the flexible acyclic BAPE structural unit tended to form perfect HT rings, and behaved the high thermal stability (5% thermogravimetric loss temperature is 296.8 degrees C), hydrophilicity and relatively low degree of acid hydrolysis. The PHT film containing the more rigid DACr structural unit had the higher mechanical strength (tensile strength 53.6 MPa), hydrophobicity, resistance to organic reagents and the degree of acid hydrolysis, it was complete degaration in glacial acetic acid solution and recyling the raw monomer of DACr with high yield of more than 83%. Due to the influence of both the structural integrity of HT and the rigidity of the structural unit, the two PHT materials showed the similar glass transition temperatures (T(g)s were 117.8 and 117.9., respectively). This study provides theoretical basis and experience for the structural design and performance regulation of PHT materials. Meantime, the obtained PHT materials meet the degradation requirements and have the potential application value.

CHARACTERIZATION OF A NEW PDAP/LDPE BLENDS

Blending Effects on Polymorphic Crystallization of Poly(l-lactide)

Rheological Properties of PET/PA66/Liquid Crystalline Copolyesteramide Blends

Polyphosphazene/low‐density Polyethylene Blends: Miscibility and Flame‐retardance Studies

Study on Rheological Properties and Relaxational Behavior of Poly(dianilinephosphazene)/low-Density Polyethylene Blends

Thermal and Crystallization Properties of HDPE and HDPE/PP Blends Modified with DCP

Effects of Dibenzocrown Ether and Diphenoxyethylene Diether Structural Units on the Properties of Degradable Polyhexahydrotriazine Thermosetting Resins

Miscibility, Morphology and Thermal Properties of Poly(para‐dioxanone)/poly(d,l‐lactide) Blends

Study on combustion and thermal degradation behaviors of flame-retarding PA-6/PP blends added with nano-LDH and APP

Polylactic acid/poly(butylene diglycolate-co-butylene terephthalate) blends with improved toughness

Thermal Properties of High-Density Polyethylene-Petroleum Resin Blends

The Effect of PP and Peroxide on the Properties and Morphology of HDPE and HDPE/PP Blends

Characterization and Properties of the Neutral and Doped Blends of Poly(3‐dodecylthiophene) with Low‐density Polyethylene

Thermal and Phase-Separation Behavior of Injection-Molded Poly(L-Lactic Acid)/Poly(D-Lactic Acid) Blends with Moderate Optical Purity

Understanding of intermolecular interaction in PVDF/PTW blends: Crystallization behavior, thermal, and dynamic mechanical properties

Effect of Partial Crosslinking on Morphology and Properties of the Poly(β-Hydroxybutyrate)/poly(d,l-lactic Acid) Blends

Study of Compatibility Between Laminar Structure and Barrier Properties of Polyethylene/Modified Polyamide Blends

Study on Reactive Blends of PET/LLDPE-g-MA

Reinforcing effect of low polyethylene wax content on polydicyclopentadiene

Blends of Phenolphthalein Poly(Ether Ether Ketone) and A Thermotropic Liquid Crystalline Copolyester

Improved Processing and Properties for Polyphenylene Oxide Modified by Diallyl Orthophthalate Prepolymer