Abstract:Electrochemical oxidation modification of carbon fiber/polyimide composite interface. This research involved the modification of carbon fiber (CF) through electrochemical anodizing under different conditions and focused on analyzing the impact of modifying CF surface and examining the interfacial characteristics of thermoset polyimide (PI) composites. The process of electrochemically oxidizing CF consists of two distinct stages. The oxidation stage mainly occurs under the conditions of low current intensity and low electrolyte concentration, at the graphite boundary defects on CF surface. The etching effect stage intensifies on CF surface under high current intensity and electrolyte concentration, resulting in the fracture and detachment of the carbon rings. Electrochemical oxidation improves CF roughness and the quantity of active functional groups, which enhances mechanical interlocking and chemical bonding between CF and PI. Furthermore, the introduction of reactive hydrogen groups can contribute to the PI curing process, significantly improving the weak interface bonding problem between CF and PI. The interfacial shear strength (IFSS) of the composites increased from 82.08 to 104.33 MPa and 114.08 MPa in acidic and alkaline electrolyte environments, respectively. Highlights Improved interfacial compatibility between CF and polyimide resin through electrochemical oxidation The relationship between the physical morphology and chemical composition of the surface of CF and their interfacial properties was investigated. The interfacial shear strength of CF/PI was increased by 38.99% without any loss in mechanical properties of the CF. The electrochemical oxidation mechanism of CF under different electrolytes was revealed.

INFLUENCE OF INTERFACE PROPERTIES ON FLEXURAL FATIGUE PERFORMANCE OF UNIDIRECTIONAL CARBON/EPOXY COMPOSITES

Study on Flexural Fatigue Life of Ultra-High Toughness Cementitious Composites under Constant Amplitude Cyclic Loading

Fatigue Performance of Prefabricated Composite T‐beams under Cyclic Overloading: an Experimental Study

Fatigue Degradation Properties of Pcm-Concrete Interface

Impact responses and residual flexural properties of narrow CFRP laminates

INTERFACE OF ELECTRON BEAM CURED CARBON FIBER REINFORCED COMPOSITES

Fatigue crack growth and propagation along the adhesive interface between fiber-reinforced composites

Unravelling the Influence of Surface Modification on the Ultimate Performance of Carbon Fiber/Epoxy Composites

Influence of carbon fiber surface treatments on interfacial properties of CF/PI composites

Influence of Interface on Mechanical Behavior of Al-B4C/Al Laminated Composites under Quasi-Static and Impact Loading

Effect of electrochemical anodic oxidation modification on the interfacial properties of carbon fiber reinforced polyimide composites

EFFECT OF MATERIAL PROPERTIES ON THE DYNAMIC BEHAVIOR OF A FIBER-REINFORCED COMPOSITE WITH INTERFACES

STUDY ON FATIGUE BEHAVIOR OF METAL/METAL LAMINATES

The effect of interface properties on the mechanical behavior of 3D braided composites under unidirectional tensile loading

The Mechanical and Tribological Properties of Anodic Oxidation Treatment Carbon Fiber-Filled PU Composite

Determination of Fatigue Cracking Direction in Composite Laminates

The effect of interface properties on the mechanical behaviour of 3D braided composites under unidirectional tensile loading

Effect of interface damage on tensile behavior of fiber-reinforced ceramic-matrix composites after thermal fatigue loading

The Influence of Plasma Surface Treatment of Carbon Fibers on the Interfacial Adhesion Properties of UHMWPE Composite

Fatigue Failure Behavior of Aramid Fiber Reinforced Styrene Butadiene Rubber Composite with Different Fiber Coatings

Influence of Geometrical Parameters of Interface of 304L/533B Composite Plates on Interfacial Properties