Abstract:With a better balance among good mechanical performance, high freedom of design, and low material and manufacturing cost, chopped carbon fiber chip reinforced sheet molding compound (SMC) composites show great potential in different engineering applications. In this paper, bending fatigue behaviors of SMC composites considering the heterogeneous fiber orientation distributions have been thoroughly investigated utilizing both experimental and computational methods. First, four-point bending fatigue tests are performed with designed SMC composites, and the local modulus is adopted as a metric to represent the local fiber orientation of two opposing sides. Interestingly, SMC composites with and without large discrepancy in local modulus of opposing sides show different fatigue behaviors. Interrupted tests are conducted to explore the bending fatigue failure mechanism, and the damage processes of valid specimens are also closely examined. We find that the fatigue failure of SMC composites under four-point bending is governed by crack propagation instead of crack initiation. Because of this, the heterogeneous local fiber orientations of both sides of the specimen influence fatigue life. The microstructure of the lower side shows a direct influence while that of the upper side also exhibiting influence which becomes more prominent for high cycle fatigue cases. Furthermore, a hybrid micro-macro computational model is proposed to efficiently study the cyclic bending behavior of SMC composites. The region of interest is reconstructed with a modified random sequential absorption algorithm to conserve all the microstructural details including the heterogeneous fiber orientation, while the rest of the regions are modeled as homogenized macro-scale continua. Combined with a framework to capture the progressive fatigue damage under cyclic bending, the bending fatigue behaviors of SMC composites are accurately captured by the hybrid computational model comparing with our experimental analysis.

Fatigue crack growth and propagation along the adhesive interface between fiber-reinforced composites

Micro Failure Analysis of Fiber Metal Laminates

Fatigue crack growth characterization of composite-to-steel bonded interface using ENF and 4ENF tests

Fatigue Crack Growth on the Interface of Copper and Epoxy Molding Compound under Mixed-Mode Loading

Fatigue Performance of Prefabricated Composite T‐beams under Cyclic Overloading: an Experimental Study

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Crack Propagation and Debonding Development of CFRP Laminate Strengthened High-Strength Steel Plates under Fatigue Loadings

X-ray microtomography observation of interfacial debonding in CFRP under combined loading

Fatigue life prediction of composite suspension considering residual stress and crack propagation

A Continuum Damage and Discrete Crack Module for Fatigue Damage Prediction of Laminated Composite Structures

Fatigue damage monitoring of composite laminates based on acoustic emission and digital image correlation techniques

Experimental Investigation of Fatigue Debonding Growth in FRP–Concrete Interface

Experimental Study on Compression Failure of Composite Laminates with Prefabricated Surface Cracks

Influence of the Test Method on the Characterization of the Fatigue Delamination Behavior of a Composite Material under Mixed Mode I/II Fracture

Prediction on residual flexural fatigue life of rock-concrete interface based on a deformation-controlled fatigue crack propagation criterion

Micromechanical transverse tensile crack propagation of unidirectional fiber reinforced epoxy SMC slice imbedded in a TDCB specimen

Propagation rate transients in J-controlled fatigue characterization of adhesives

Experimental and Theoretical Study on the Fatigue Crack Propagation in Stud Shear Connectors

In situ characterization of the flexural behavior and failure mechanism of 2D needle-punched carbon/carbon composites by digital image correlation

Experimental and computational analysis of bending fatigue failure in chopped carbon fiber chip reinforced composites

Simulation of crack propagation of fiber reinforced cementitious composite under direct tension