Abstract:Ultrasonic flowmeters (UFMs) based on the principle of transit time difference are widely used in process industries. The transit time difference is obtained through analyzing received acoustic signals generated by a couple of transducers located upstream and downstream respectively. The quality of received acoustic signal will directly affect the measurement accuracy of UFM. For this reason, a measurement-calculation coupled approach combining measurement tools and numerical simulation for calculating the acoustic signal of UFM is proposed in this paper. The method can predict the acoustic signals of UFM with different flowrates. First, important boundary condition (vibration velocity on transmitter transducer surface) is measured by measurement tool, which can reduce computational complexity and also avoid modeling transmitter transducers. Second, simulating the wave propagation (difficult to access experimentally) within moving medium by using the measured vibration velocity. Third, obtaining the transfer function of receiver by comparing estimated force acting on the receiver transducer surface with measured voltage signal from receiver, which can avoid modeling receiver transducer. Finally, predicting the received acoustic signal at different flowrates by using the transfer function. The rationality of predicted data was validated by comparing experimental and predicted acoustic signal on receiver transducer at different flowrates. A good agreement between simulated and experimental data was obtained, which means that the working processes of the acoustic signal generated by actual transducers inside UFMs can be accurately predicted based on this method. Analysis of the predicted results will provide good guides and advices to the design of UFMs involving actual application.

APPLICATION OF NUMERICAL ANALYSIS METHOD TO ULTRASONIC TESTING

Auto-tuning Numerical Method for Acoustic Wave Simulation Using Analytical Solution

Numerical Comparison of Two Boundary Element Methods for Plane Harmonic Functions

A Numerical Method for Analyzing the Low-Frequency Noise of Bridge under Vehicle Load

Evaluation of Pipe Axial Defeat Through the Use of Ultrasonic Guided Wave and Matching Pursuit

Numerical Analysis of Buried Pipe Characteristics

BUCKLING ANALYSIS OF STRUCTURES BY THE FINITE PARTICLE METHOD

Numerical Analysis of Acoustic Characteristic of Muffler with Complicated Structure and Structural Optimization

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

Application of Computer Finite Element Simulation to the Quantitative Inspection of Flaw MFL

Numerical analysis of ultrasonic spot welding of metal sheets: a review

Some Recent Investigations on the Application of Boundary Element Methods

Numerical Analysis Of Thin Skin Depths Of 3-D Eddy-Current Problems Using A Combination Of Finite Element And Meshless Methods

Numerical Analysis of Transducer Installation Effect on Ultrasonic Gas Flow Meter

Finite element analysis on ultrasonic propagation of interface bonding of bimetal composites

Attempt at Using Infinite Element Method in Dam Temperature Field Analysis

Finite element based research on ultrasonic spectral characteristic of inner wall defect of metal materials

A Method Combining Measurement Tool and Numerical Simulation for Calculating Acoustic Signals of Ultrasonic Flowmeter

Application of Automatic Ultrasonic Testing Method with φ48 mm 35MnBM Bar

APPLICATION OF QUADRATURE ELEMENT METHOD TO FIRE ANALYSIS OF PLANAR STEEL FRAMES

New Numerical Analysis Method in Computational Mechanics: Composite Element Method