Abstract:The ultraviolet–visible (UV–Vis) absorption properties of a range of nano‐particle titanium dioxides have been optimized and interrelated to the effects of the nature of calcination versus wet milling methodologies. Different inorganic and organic surfactants and surface treatments were also assessed. The TiO2 particles as prepared were characterized using X‐Ray diffraction spectrometry (XRD), transmission electron microscopy (TEM), BET, UV/Vis spectroscopy, and CPS disk centrifuge. Data are related to their spectral absorption properties and weathering stability in an isocyanate‐acrylic coating via gloss retention and weight loss. The choice of particle size is a compromise between UVA absorption, UVB absorption, visible transmission, and photoactivity. It is demonstrated that TiO2 with a crystallite size of 25 nm yields a product with the optimum properties. A method using UV/visible absorption spectroscopy has been developed and found to give excellent sensitivity to particle size was shown with CPS (disk centrifuge). It is shown to be a useful way to assess nano‐TiO2 dispersions. The wet milling of the base TiO2 before surface treatment was also optimized utilizing different dispersants. It was shown that using the ratio of absorbance at 300:550 nm is a good approximation for the ratio of the whole area under the curve in the UV spectrum to that in the visible region. This was used as an indication of the generation of smaller fragments generated by milling the larger aggregates. The particle‐size distribution and nature of the wet‐milling process significantly influenced the subsequent accelerated ATLAS weathering performance of the titania particles in an isocyanate‐acrylic coating.

RESEARCH ON MODIFIED NANO TiO2 PARTICLES IN INTERIOR CRYLIC-ACID LATEX DOPE

Modified nano TiO2 in high anti-scouring performance latex dope

Study on in-situ Modification of Vinyl Acetate-Acrylate Latex by Anatase TiO2 Sol

Fabrication of Modifier-Free Superhydrophobic Surfaces with Anti-Icing and Self-Cleaning Properties on Ti Substrate by Anodization Method

Improvement of Polyacrylate Coating by Filling Modified Nano-Tio2

Study on modification of nano-TiO_2 coated on surface of purified diatomite

Dry Modification of Nano-TiO_2 with Aluminate Coupling Agent and Its Application on Anti-aging of Powder Coating

Surface Modification of Nano TiO2 for Paper Coatings

Nano-TiO2 modified acrylic coatings for improving resistance to ultraviolet illumination

Surface modification of antimony doped tin oxide powders using steric acid/tetrabutyl titanate compound agent

RESEARCH ON WEATHERABILITY OF NANO-TiO_2 MODIFYING EXTERIOR LATEX PAINT

Preparation, Modification and Property Characterization of Nano-TiO2

Optimization of the ultraviolet–visible absorption properties of nano‐particle TiO2: Influence of milling, surface area and surfactants on particle‐size distribution, and stability of isocyanate/acrylic paints

Surface modification of nanometer titanium dioxide

Organic Acid Modification of Nano-Scale TiO2

The Inlfuence of Nano-TiO2on Properties of Epoxy Resin Coatings

Modification of Talc@TiO2 toward high-performance nitrile rubber application

A Study on Surface Modification of Nano-scale TiO2 by Hexadecanoic Acid

Preparation and Characterization of Organic Nano-Titanium Dioxide/Acrylate Composite Emulsions by In-Situ Emulsion Polymerization

Polyacrylate-Core/Tio2-Shell Nanocomposite Particles Prepared by in Situ Emulsion Polymerization

Studies on Preparation of KH - 570 Modified Nano - Titanium Dioxide and Its Dispersibility