Abstract:Epoxy-TiO2 nanocomposite coatings were prepared by the utilization of the solution intercalation method with the presence of the sonication process and the influence of embedding different loading ratios of TiO2 nanoparticles within neat epoxy resin was investigated. To further improve the corrosion protection performance and to fulfill the hydrophobicity of the developed coated surfaces, the epoxy polymeric resin was modified with polydimethylsiloxane (PDMS) and different loading ratio of TiO2 nanoparticles was intoduced to the modified polymeric matrix to fabricate PDMS modified epoxy nanocoposite coating sytems. All developed coating systems were characterized by means of Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC) to investigate the chemical structure and the glass transition temperatures (Tg) of the developed coating systems, respectively. The morphology, topology, optical properties, and the wettability were also examined by field emission scanning electron microscope (FESEM), energy dispersive X-rays analyzer (EDX), atomic force microscopy (AFM), ultraviolet-visible spectroscopy (UV-vis), and contact angle measurement (CA), respectively. Moreover, the electrochemical behavior and the barrier properties of the developed coating films were investigated via electrochemical impedance spectroscopy (EIS). The findings revealed a good curing level with higher Tg values for all developed nanaocompsoite coating systems and confirmed the efficiency of the sonication process in developed well-dispersed TiO2 within the polymeric matrix. Also, the obtained results revealed the ability of certain amount of TiO2 nanoparticles in enhancing the corrosion protection performance of epoxy based coating systems. The compatibility of epoxy resin, PDMS, and TiO2 nanoparticles was also confirmed by achieving the hydrophobicity and obtaining the best corrosion protection performance.

UV-curable Coatings with Nano-Tio2

Synthesis and Study of Novel UV-Curable Powder Coatings

Study on in-situ Modification of Vinyl Acetate-Acrylate Latex by Anatase TiO2 Sol

Effect Of Titanium Dioxide On The Uv-C Ageing Behavior Of Silicone Rubber

The Effect of Silane Coupling Agent Containing Methacryloxy Group on UV-Curable Acrylate-Modified Polyurethane/SiO2 Hybrid Coatings

Controllable hydrothermal synthesis, optical and photocatalytic properties of TiO 2 nanostructures

In-Situ Preparation of Nano-TiO_2 Modified Polyacrylate(PA) Coatings

The Coating Properties of Waterborne UV-Curable Polyurethane Acrylate and Influencing Factors

Preparation and Characterization of Acrylic/Nano-Tio2 Composite Latex

Curing Behavior of UV-Initiated Surface-Modified Nano-TiO2/Epoxy Resin Prepolymers and the Properties of Cured Composites

Enhancing weathering resistance of UV-curable coatings by using TiO2 particles as filler

Improving the Performance of UV-curable Coatings with Carbon Nanomaterials

Study on Structural, Optical and Hydrophilic Properties of FTO/TiO2 Tandem Thin Film Prepared by Aerosol-Assisted Chemical Vapor Deposition Method

Kinetic Study on the UV‐induced Photopolymerization of Epoxy Acrylate/tio2 Nanocomposites by FTIR Spectroscopy

Effects of TiO2 Nanoparticles on the Overall Performance and Corrosion Protection Ability of Neat Epoxy and PDMS Modified Epoxy Coating Systems

Fabrication and characterization of photocatalyst composite coatings of TiO2/TiC-Ti using Ti and TiC powders

A UV-curable silicone acrylate anti-smudge coating containing tertiary amines and Ti with the ability to prevent oxygen inhibition

Preparation and properties of UV-curable polymer/nanosized indium-doped tin oxide (ITO) nanocomposite coatings

Silicon and Alumina Coating of TiO_2 Particles and Sealing of Photo-catalysis

De-Agglomeration and Dispersion of Nano-Tio2 in an Agitator Bead Mill

Preparation, anticorrosion mechanism, and application of nano-Ti polymer-containing coating