Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

On-line Monitoring and Fault Diagnosis for Induction Machine Based on Vector Control Theory-Theoretic Analysis

Calculation of the main parameters of induction machines under rotor winding faults

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Quantitative Broken Rotor Bar Fault Detection for Closed-Loop Controlled Induction Motors

Stator Inter-Turn Fault Detection in Closed-Loop Controlled Drive Based on Switching Sideband Harmonics in CMV

Inter-turn Fault Detection for the Inverter-Fed Induction Motor Based on the Teager-Kaiser Energy Operation of Switching Voltage Harmonics

Study of On-Line Fault Detection and Diagnostics of Three Phase Induction Motors

Rotor Faults Diagnosis in Rotor Field Oriented Controlled Induction Motors Based on Torque Current

Fault-Tolerant Control of Five-Phase Induction Motor under Single-Phase Open

Stator inter-turn fault detection for the converter-fed induction motor based on the adjacent-current phase-shift

Diagnosis of Air‐gap Eccentricity and Partial Demagnetisation of an Interior Permanent Magnet Synchronous Motor Based on Inverse Transient Complex Inductance Vector Theory

PQ Transformation and Rotor Fault Diagnosis for Large Induction Motors

Fault Tolerant Control of a Multiphase Motor with Non-Sinusoidal Source under Open-Phase Conditions

Diagnosis of Stator Faults in Induction Motor Based on Zero Sequence Voltage after Switch-off

Current Sensor Fault Diagnosis and Tolerant Control for VSI-Based Induction Motor Drives

Characteristics Analysis and Measurement of Inverter-Fed Induction Motors for Stator and Rotor Fault Detection

Diagnosis of Broken Rotor Bar Fault in Open- and Closed-Loop Controlled Wye-Connected Induction Motors Using Zero-Sequence Voltage

Multiple Open-Switch Fault Diagnosis for Five-Phase Permanent Magnet Machine Utilizing Currents in Stationary Reference Frame

Optimized Current Trajectory Tracking Control of a Five-Phase Induction Machine under Asymmetrical Current Limits

Mean Current Vector Based Online Real-Time Fault Diagnosis for Voltage Source Inverter Fed Induction Motor Drives

Review and Development Trends of On-line Fault Detection Techniques of Induction Motors