Abstract:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Ahead of Print. The motion of magnetic-driven micro motor is controlled by external magnetic field, does not need any fuel which has good biocompatibility. However, its driving torque needs to be further improved. For it, a magnetic-driven micro-motor with speed-reduction function is proposed. The main elements for the micro-motor includes wave generator, central ring, and movable tooth frame which had to be fabricated with Electron beam lithography and vacuum evaporation coating technology. So, related processing parameters should be optimized to obtain high quality elements of the micro-motor. Here, a magnetic-driven micro-motor with speed-reduction function is proposed. Fabrication and manipulation techniques of the main elements for the micro-motor, such as wave generator, central ring, and movable tooth frame, are studied. Electron beam lithography, electron microscope, and atomic force microscopy (AFM) are applied to optimize the parameters of electron beam lithography. The optimized photolithography parameters are obtained, by which the micro movable tooth frame is successfully developed, and the photoresist molds of the wave generator and central ring is produced. Using vacuum evaporation coating technology, effect of evaporation rate on the quality of micro-parts is studied. The optimized evaporation rate is obtained, by which the nickel-based wave generator and copper-based center ring are successfully developed. The nickel-based wave generator and copper-based central ring are effectively peeled off from the substrate by ultrasonic oscillation technique. The effective manipulation of the wave generator and central ring is accomplished by AFM and piezoelectric-driven micro-probe.

FABRICATION OF A MICRO-MOTOR COIL USING POLYIMIDE BY TWICE ETCHING METHOD

Microfabrication Process Study for Stator Winding of Electromagnetic Micromotor

Fabrication of Electromagnetically-Driven Tilted Microcoil on Polyimide Capillary Surface for Potential Single-Fiber Endoscope Scanner Application.

Fabrication of a Bi-Directional Electromagnetic Microactuator

Process and Analysis of Multilayer Piezoelectric Ceramic for Micro-motor

Preparation, heat-enabled shape variation, and cargo manipulation of polymer-based micromotors

Fabrication of Microcoil with Large Tilt-Angle on Polymer Tube for Electromagnetically-Driven Scanner in Single Fiber Endoscope

Research and application on piezoelectric ceramic component with shear modes for micro-ultrasonic motor

Facile Fabrication of Helical Microfluidic Channel Based on Rope Coiling Effect

Fabrication and manipulation for key elements of magnetic-driven speed-reduction micro-motor

Modeling and Preliminary Analysis of a Miniaturized Rotary Motor Driven by Single Piezoelectric Stack Actuator

Fabrication of Stator Winding of Electromagnetic Micromotor with 1 Mm Diameter

Fabrication of φ1 mm stator winding of electromagnetic micro-motor

Fabrication of Polyimide Film by Spin Coating

Ultrasonic Micro-Motor with Multilayer Piezoelectric Ceramic and Chamfered Driving Tips

Application of AZ4903 to the Production of Micromotor's Stator Windings

Polyimide as a versatile enabling material for microsystems fabrication: surface micromachining and electrodeposited nanowires integration

A Novel Piezoelectric Micro-Motor Using Multilayer Co-Firing Piezoelectric Ceramics

Application of AZ4903 to Production of Stator Windings

Modular Micromotor Fabrication with Self‐Focusing Lithography

Mini-Emulsionfabricated Magnetic And Fluorescent Hybrid Janus Micro-Motors