Abstract:There is growing demand for high-power devices, wide bandgap SiC and GaN semiconductor materials in semiconductor market, and a drive to integrate die attach materials that can replace lead-containing solders. However, epoxy-based and solder materials face challenges to meet high thermal conductivity and survive elevated working temperatures. Pressure-assisted silver sintering has overcome these challenges, but downsides of pressure-assisted silver sintering are that it requires special equipment and for some applications, packages are unable to withstand the pressure required to facilitate sintering. Pressureless sintering materials could be processed using the same equipment as traditional die attach adhesives. It develops strong metal bonds to substrates, providing high thermal conductivity and withstanding high temperatures. However, compared to pressure-assisted sintering, pressureless materials may have difficulties to form a dense bondline structure if the formulation design is not optimized. Moreover, once the sintered structure is built during cure, further bondline reduction may induce additional stress. Therefore, it is critical that the pressureless sintering material’s mechanical properties are formulated to effectively manage stress and pass all reliability testing – especially for automotive packages. This paper will present the findings from a study that evaluated the impact of various formulation components – such as silver packing and resin chemistry – on the mechanical properties and interfacial bonding of pressureless sintering die attach adhesives. The effect on in-package reliability performance was also investigated to better understand material properties that can pass reliability testing while maintaining high thermal and electrical conductivity adhesive requirements.

Progress of Anisotropic Conductive Adhesive for Flip Chip Packaging

The Recent Development of Anisotropic Conductive Adhesive Films for Microelectronic Packaging

Shear Strength of Flip Chip Packaging Bonded with Anisotropic Conductive Film

Reliability of ACA bonded flip chip joints on LCP and PI substrates

Simulation and Experimental Analysis of Thermomechanical Stress Around Interconnects for W2W Hybrid Bonding

Electrically Conductive Adhesives in Microelectronics Packaging

The preparation of anisotropic conductive paste and its application in FOB interconnection

UV-Curable Anisotropically Conductive Adhesives for Ultra-fine Pitch Connecting

A Study on the Optimization of Anisotropic Conductive Films for Sn-3Ag-0.5Cu-Based Flex-on-Board Application at a 250 °C Bonding Temperature

Recent Progress in Conductive Adhesives

Driver IC Packaging Technologies using Anisotropic Conductive Films in Flat Panel Display

Evaluation of a double-layer anisotropic conductive film (ACF) for fine pitch chip-on-glass (COG) interconnection

Gallium–Indium–Tin Liquid Metal Nanodroplet-Based Anisotropic Conductive Adhesives for Flexible Integrated Electronics

Modeling of Smoothening Effect on Morphologies of Annealed Submicron Nickel Particles Used for Electrically Conductive Adhesives

Progress in Research on Electrically Conductive Adhesives

Enhancing Semiconductor Package Reliability through Mechanical Property Optimization of Pressureless Sintering Die Attach Adhesives

Effects of Acrylic Adhesives Property and Optimized Bonding Parameters on Sn-58Bi Solder Joint Morphology for Flex-on-board Assembly

A Study on the Bonding Conditions and Nonconductive Filler Contents on Cationic Epoxy-Based Sn–58Bi Solder ACFs Joints for Reliable Flex-on-Board Applications

Recent Progress of ACF in Flat Panel Display Packaging Applications

Preparation of Electrically Conductive Filler for Anisotropic Conductive Adhesive

Advances in Flip Chip Underfill Technology for Lead-free Packaging