Abstract:Powder coatings are gaining popularity for their economic and environmental benefits. Additives (pigments) such as zinc phosphate enhance the anti-corrosive properties of coatings, but their behavior in powder coatings has not been extensively studied. In this study, zinc phosphate was incorporated into three powder coating systems: polyester clearcoat, polyester and epoxy coatings with filler BaSO4. Neutral salt spray and electrochemical tests (OCP, LPR, and EIS) confirmed that the anti-corrosive performance improved with the addition of zinc phosphate. The optimal additive dosage was determined to be 2% for all of the coating systems studied here, based on salt spray tests. Here, the time until failure increased by 1.5 to 2 times. Using electrochemical tests, an optimal additive dosage of 8% was found for the polyester clearcoat, while the other coating systems maintained an optimal additive dosage of 2%. Performance increased by as much as one order of magnitude based on resistance/impedance measurements. This suggested a synergistic effect between the additive and the filler. The passivation layer was confirmed by both X-ray diffraction and Raman spectroscopy. Based on the results and discussion presented in this article, the discrepancy was caused by different features of the two tests, such that the electrochemical tests probe the function of intact coatings, whereas salt spray measures only the corrosion spreading from the scribe. It is proposed that the two test methods characterize different aspects of the coatings, corresponding to their service conditions. This has theoretical and practical significance in the evaluation of anti-corrosive coatings. Other properties of the coatings, including adhesion, gloss, distinctness-of-image, and pencil hardness, were measured as per applicable standards and the conformance was verified.

Influence of Flaky Nickel Powder on Permeation Resistance of Fluorocarbon Coatings

Fire and Corrosion Resistances of Intumescent Nano-coating Containing Nano-SiO2 in Salt Spray Condition

Synthesis Of Fluoroalkyl-Modified Polyester And Its Application In Improving The Hydrophobicity And Oleophobicity Of Cured Polyester Coatings

Preparation and Properties of Anti-corrosion Multifunctional Fluorocarbon Coatings

Interpenetrating Network Polymer (IPN) Composite Coating Containing Fluorinated Polyacrylic Complex Latex Particles Toward High Wear and Corrosion Resistance

Effect of Fluorocarbon Polymers on Hydrophobicity, Wear Resistance and Corrosion Resistance of Epoxy Resins

Structure–Property Relationships for Fluorinated and Fluorine-Free Superhydrophobic Crack-Free Coatings

Effect of Spray Conditions on Deposition Behavior and Microstructure of Cold Sprayed Ni Coatings Sprayed with a Porous Electrolytic Ni Powder

Preparation, anticorrosion mechanism, and application of nano-Ti polymer-containing coating

Study on the Corrosion Resistance of Superhydrophobic Ni-Co- P-BN(h) Nanocomposite Coatings Prepared by Electrochemical Machining and Fluorosilane Modification

Corrosion resistance and corrosion mechanism of the superhydrophobic coating fabricated on aluminum alloy in the salt spray corrosion environment

Enhancing Wear and Corrosion Resistance of Electroless Ni-P Coatings in CO 2 -saturated NaCl Solution through Polytetrafluoroethylene Incorporation

Hydrophobicity and corrosion resistance of waterborne fluorinated acrylate/silica nanocomposite coatings

A Comparative Study on the Anti-Corrosive Performance of Zinc Phosphate in Powder Coatings

Waterborne corrosion-resistant hydrophobic alkyd resin composite coatings modified with fluorinated acrylate–siloxane and submicron-sheet zinc phosphate pigment

Tribological properties and corrosion resistance of epoxy resin‐polytetrafluoroethylene bonded solid lubricating coating filled with flake aluminum

In Situ Nanoscale Characterization of Water Penetration Through Plasma Polymerized Coatings.

The Preparation and Properties of a Ni-SiO2 Superamphiphobic Coating Obtained by Electrodeposition

Analysis and discussion on the surface enrichment of fluorine atoms in fluorocarbon antifouling flashover coating

Anticorrosion Mechanism of Epoxy Coating with Nano-flake Barium Phosphate

Porosity, Mechanical Properties, Residual Stresses of Supersonic Plasma-Sprayed Ni-Based Alloy Coatings Prepared at Different Powder Feed Rates