Abstract:NOx and SO2 are the main air pollutants emitted from the coal-fired combustors. Since the typical combination of selective catalytic reduction (SCR) and we flue gas desulfurization (WFGD) is not suitable for some of industrial flue gas treatment due to their unsuitable temperature window and limited retrofitting space, new technologies must be developed. This paper proposes an effective we method for simultaneous removal of NOx and SO2. The insoluble NO was first oxidized into NO2 by ozone, and then NO2 together with SO2 were both absorbed in one we wash tower. To further improve NO2 removal efficiency, a new kind of additive was proposed and tested. Effects of various influence factors, such as additive concentration, residence time in the wash tower, liquid/gas ratios, initial NO/SO2/O-2 concentration and slurry pH value, were carefully evaluated in a home-designed experimental platform. Results indicated that the NOx removal efficiency was positively correlated with the increasing the additive concentration, while the maximum denitration and desulfurization efficiency were more than 95% and 86%. The NOx removal efficiency was enhanced with the increasing residence time and liquid/gas ratios. The alkaline environment was verified to be beneficial for the simultaneous absorption process. The exiting O-2 in flue gas would not consume additives, and the denitration and desulfurization efficiency were insensitive to the initial NO and SO 2 concentration as well. Only 2% decrease of the denitration efficiency was observed after 300 mins stability test, while the desulfurization efficiency kept > 98%. With the characterizations of Ion Chromatograph (IC), NO2-, NO3- and SO42- were detected as the main absorption by-products anions, whereas NO2- accumulation would inhibit the overall NOx removal. Finally, the mechanism of simultaneous removal of SO2 and NO using the novel liquid phase catalyst was proposed and discussed.

Technical Progress for Combined Control of Sulfur Dioxide and Nitric Oxides

Fundamentals and Environmental Applications of Non-thermal Plasmas: Multi-pollutants Emission Control from Coal-Fired Flue Gas

Present Situation of Research on Combined Control of SO2 and NOx in Flue Gas

Progress in Simultaneous Removal of SO2 and NOx from Flue Gas

Technique of NOx Pollution Control for Flue Gas

Recent advances in simultaneous removal of SO2 and NOx from exhaust gases: Removal process, mechanism and kinetics

Study on the collaborative removal of multi-pollutants from flue gas

Flue-gas De-NOx technology with O3 oxidation-SO32-reduction process

A002 DEVELOPMENT OF MULTI-POLLUTANTS CONTROL TECHNOLOGY FOR FLUE GAS FROM POWER PLANTS IN CHINA(Plenary Lecture)

Development Of Multi-Pollutants Control Technology For Flue Gas From Power Plants In China

Research Progress of Metal Oxide Sorbent/Catalyst for Combined Removing SO_2 and NO_x from Flue Gas

Flue-gas De-NO; technology with O; oxidation-SO; reduction process

PRESENT SITUATION AND TRENDS OF DESULFURIZATION AND DENITRIFICATION OF FLUE GAS

Research and Progress of Sulfur-Autotrophic Denitrification Processes of Nitrate Removal in Wastewater Treatment

A Superior Liquid Phase Catalyst for Enhanced Absorption of NO2 Together with SO2 after Low Temperature Ozone Oxidation for Flue Gas Treatment

Progress in recent sustainable materials for greenhouse gas (NOx and SOx) emission mitigation

Mechanism of Simultaneous Desulfurization and Denitrition for Flue Gas

Integrated Processes for Purification of SO2 and NOx in Flue Gas

Front multi-pollutant oxygen spraying cooperative control system and method

Studies on Simultaneous Catalytic Removal of NOX and SO2

Research And Review On Simultanous Desulfurization And Denitrition From Flue Gas