Abstract:Journal of Industrial Textiles, Volume 54, Issue , January-December 2024. In order to address the problem of transition slip between the cylindrical segment and the ellipsoidal head segment of the carbon/carbon composite crucible preform with asymmetrical structure during the winding process, a winding pattern combining geodesic and non-geodesic is presented innovatively. Firstly, the formulae for the winding angle and the winding central rotation angle of the crucible cylindrical segment and the ellipsoidal head segment are established, and the fourth-order Runge-Kutta numerical method is employed for parametrical design. The two-tangent point winding path is determined by analyzing the effect of the cylindrical segment's winding pitch, different ellipsoidal head segment heights, and slip coefficient on the winding angle. Secondly, the needle disk winding method is proposed to address the slight winding angle at the open end of the cylinder, making it easier to hang the yarn. Finally, the experiment on dry yarn winding of 3k carbon fiber (linear density: 198 g/km) is carried out. The results indicate that the relative error rate between the actual winding angle and the theoretical design angle differs by no more than 1.66%, demonstrating that carbon fibers can be stably and uniformly wound onto the surface of the carbon/carbon composite crucible preform. Compared to the traditional manual winding method, the winding pattern enhances winding efficiency, ensures carbon fibers' uniformity and structural stability, and provides a new technological approach to producing high-performance composite materials.

RESEARCHES ON MOULDING TECHNIQUE AND EQUIPMENT OF TWIN-SCREW EXTRUSION FOR CARBON MATERIAL

Finite Element Analysis and Optimal Researchon Plasticizing Capacity of Screws

Design Research on Roller of New Fiber Carding Machine

New Insight into the Action of Supercritical Carbon Dioxide for Grafting of Maleic Anhydride Onto Isotactic Polypropylene by Reactive Extrusion

Research Status and Development Trend of Carbon Fiber Reinforced Polymer Hydraulic Cylinder

Study on the Bom Transform Technology and Application in Injection Molding Machine

RESEARCH ON TECHNOLOGY AND EQUIPMENT OF LONG FIBER REINFORCED THERMOPLASTICS COMPOSITES

The Research on RTM Molding Process of Thin-wall Rib Structure of Composite Materials

Qualitative study on intermeshing co-rotating twin screw extrusion using novel visual technique

Preparation of High-Performance Carbon Fiber-Reinforced Epoxy Composites by Compression Resin Transfer Molding

Enhancing Mixing and Thermal Management of Recycled Carbon Composite Systems by Torsion-Induced Phase-to-Phase Thermal and Molecular Mobility

Development of Research and Technology Characteristic Analysis for Multi-Cut-Transfermix Screw Extruder

Optimization and experimental validation of reinforcing fibers winding pattern for carbon/carbon composite crucible preform

Progress and Prospect of Research and Application of Semi-Solid Alloy Rheoforming Processes

Analysis on Melting Mechanism in the Cross Section of Co-Rotating Twin Screw Extruder

Study on the influence of in-mold sequential injection molding process parameters on mechanical properties of self-reinforced single composites

Research and Development on Preparation Technology of Ceramic Injection Molding

Modeling of Manufacturing Processes of Carbon Matrices Composites and Prediction of Mechanical Properties of Materials During the Process

Research on Effect of Operating Parameters of Calcium Carbonate-plastic Twin-screw Extruder on Tensile Strength of Sheet Material

Progress in the Preparation Process and Application of Carbon Fiber Reinforced PEEK Composites

New Injection Molding Technology and Development for Polymer Materials