Abstract:The paper studies the effect of stiffeners in cross-section on the vibrations, barrel cooling, and firing accuracy. A quasi-one-dimensional mathematical model of barrel thermal conductivity is presented, taking into account the shape of the outer surface by the shape coefficient calculated on the basis of the perimeter of the barrel outer surface with stiffeners. When modeling the firing of a burst from a 30-mm cannon, the problem of internal ballistics was solved in a thermodynamic formulation, taking into account the distribution of the parameters of the gas-powder mixture along the length of the barrel and back pressure; in the time intervals between shots, the problem of gas outflow from the barrel was solved. Longitudinal-transverse vibrations of the barrel were calculated using a quasi-one-dimensional mathematical model. Boundary-value problems were solved using the integral-interpolation method. Cauchy problems were solved by the Runge-Kutta method. The permissible thickness of the barrel when fired is calculated. The results of modeling for a barrel with stiffeners are presented. It is shown that the amplitude of vibrations of a barrel with stiffeners is 36% less than the amplitude of vibrations of a cylindrical barrel. The spread of points of destruction when shooting at a vertical target at a distance of 1.5 km is reduced by 67%. The temperature of the outer surface of the barrel for each of 10 shots is reduced by 25% and when firing a burst of 100 shots it is reduced by 16%.

Research on the Regularity of the Stress and Deformation of the Barrel

A Friction Evaluation Method Based on Barrel Compression Test

Investigation on Structural Failure of Filament Reinforced Barrel Containment

Design Research on Roller of New Fiber Carding Machine

Study and Countermeasure on Side Effects from Principal Stress Axis Rotation Experiment with Hollow Cylinder Apparatus

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

Influence of the Deformation of Riveting-Side Working Head on Riveting Quality

Checking Research on Barrel Stability under Muzzle Strong Impact

Experimental study on centrifuge concrete filled thin-walled steel tubular components under the action of torsion

The Construction of a Small-Caliber Barrel Wear Model and a Study of the Barrel Wear Rule

EXPERIMENTAL STUDY ON CENTRIFUGAL CONCRETE-FILLED STEEL TUBES UNDER BENDING AND TORSION

Analyzing barrel surface damage in failed large caliber cannons

3-D Dynamic Elastic–plastic FEA for Rotating Disk Indirect Bar–bar Tensile Impact Apparatus: Numerical Analysis for the Generation of Mechanically-Filtered Incident Stress Pulses

Finite element analysis of the friction and wear of the barrel bore during the projectile extrusion

Study on the bond stress-slip relationship variation with the position

Strain Hardening and Strain-Rate Effect in Friction Between Projectile and Barrel During Engraving Process

Studies on the Measurement and Stress Analysis of Suspension of Artillery

Investigation of Automatic Cannon Barrel Shape Impact on Oscillatory and Temperature haracteristics

Plastically Deformed Tubes Subjected to Mechanical Expansion Processes

Strain concentration caused by the closed end contributes to cartridge case failure at the bottom

Analysis for the residual prestress of composite barrel for railgun with tension winding