Investigation of Automatic Cannon Barrel Shape Impact on Oscillatory and Temperature haracteristics

I. G. Rusyak,V. G. Sufiyanov,D. A. Kljukin

DOI: https://doi.org/10.22213/2410-9304-2023-4-81-87

2023-12-31

Abstract:The paper studies the effect of stiffeners in cross-section on the vibrations, barrel cooling, and firing accuracy. A quasi-one-dimensional mathematical model of barrel thermal conductivity is presented, taking into account the shape of the outer surface by the shape coefficient calculated on the basis of the perimeter of the barrel outer surface with stiffeners. When modeling the firing of a burst from a 30-mm cannon, the problem of internal ballistics was solved in a thermodynamic formulation, taking into account the distribution of the parameters of the gas-powder mixture along the length of the barrel and back pressure; in the time intervals between shots, the problem of gas outflow from the barrel was solved. Longitudinal-transverse vibrations of the barrel were calculated using a quasi-one-dimensional mathematical model. Boundary-value problems were solved using the integral-interpolation method. Cauchy problems were solved by the Runge-Kutta method. The permissible thickness of the barrel when fired is calculated. The results of modeling for a barrel with stiffeners are presented. It is shown that the amplitude of vibrations of a barrel with stiffeners is 36% less than the amplitude of vibrations of a cylindrical barrel. The spread of points of destruction when shooting at a vertical target at a distance of 1.5 km is reduced by 67%. The temperature of the outer surface of the barrel for each of 10 shots is reduced by 25% and when firing a burst of 100 shots it is reduced by 16%.