Abstract:Abstract Masonry is one of the most common building materials, which is used due to low cost, good sound and heat insulation properties, easy availability and locally available material [1]. Masonry walls are consisted of bricks and mortar which interconnect regularly, the bricks are jointed together by the mortar through various conventional patterns. Since its extensive application it would certainly be subjected to a variety of strikes from human activities such as wars and military conflicts apart from erosion of natural forces wind, rain and so on. The knowledge of masonry will be useful if on urban battlefield because of the inability of conventional forces to manoeuvre troops and vehicles with ease. Many reviewer hold that urban warfare is on the increase, with recent events in Iraq, Libya and Syria indicating that the battleground is shifting inexorably to large and small conurbations. Thus it is necessary to work out how to operate in the future urban environment and maximise our capabilities at a time of diminishing military strength [2]. As pointed out by C. S. Meyer, the U.S. Army’s concern in urban operations has brought about efforts at the U.S. Army Research Laboratory to develop an initial set of material model parameters to enable physics-based penetration simulations of high-fidelity brick and mortar masonry wall models. A search of publicly released literature turned up not much concerning modeling and simulation of weapon effects against brick and mortar targets. The characteristic of concrete under dynamics load has been studied in detail however the investigation of dynamic material properties of brick and mortar is in early stages [3]. What has been historically employed to investigate the dynamic characteristic of concrete includes theoretical method, experimental method and the numerical simulation. It has been shown that numerical stimulation is a cost-effective method and can provide more information of process history for sophisticated analysis than experimental method. Nevertheless, the data from experiments were crucial because on the one hand any modern analysis and stimulation computation should necessarily be validated by those come from real range tests, on the other hand the material parameters which are of vital importance to obtain a reasonable and compelling result must be furnished by or refer to experimental data [4]. The experimental exploration indicates that brick and mortar joint act similarly as concrete. Many material models are proposed to describe the behaviour of concrete, which are able to apply to solution of simulating behaviour of masonry reasonably. Li et al. [5] investigated the response mode of masonry subjected to vented gas explosion through experiment and simulation, in which the anisotropic material model *MAT_96 (MAT_BRITTLE_DAMAGE) has been adopted. The material model has been developed by Govindjee et al. [6]. Meyer explored profoundly the potential of the HJC model to apply in simulation of penetrations, which was initialled by Holmquist and Johnson in 1993 [3].

Insert Cylinder Structures for Mortar Barrel Strengthening

Investigation of Automatic Cannon Barrel Shape Impact on Oscillatory and Temperature haracteristics

Checking Research on Barrel Stability under Muzzle Strong Impact

Investigation on Structural Failure of Filament Reinforced Barrel Containment

Constitutive relationship of soil in contact with mortar under continuous loading

Compressive Behavior of Concrete Jacketed in Basalt TRM Shell: Experiments and Predictions

Spallation Mechanism of RC Slabs under Contact Detonation

Investigation of Multi layered Mitigation Systems for Protection from 120mm Mortar HE Top Attacks

Influence of Filler and Fiber Properties and Their Ratio on the Dynamics and Strength of Reinforced Cylinders Under Internal Explosion

Optimization of the Laminate Structure of a Composite Cylinder Based on the Combination of Response Surface Methodology (RSM) and Finite Element Analysis (FEA)

Experimental and numerical investigation on penetration of clay masonry by small high-speed projectile

Design and analysis of a scheme for the naval gun test shell entering the bore

The effect of an explosive shock wave on the plate of a protective structure of a critical infrastructure

Experimental Investigation of Discrete Multilayered Vessels under Internal Explosion

A one-dimensional mathematical model of barrel vibrations with arbitrary cross-sectional shapes

Modeling and dynamic analysis of artillery barrel-cradle structure with clearance

Structural Integrity Assessment of a Solid Propellant Grain Considering Confining Pressure Effect

Design and Performance of a Micro-Scale Detonation Train with a Built-in Pyrotechnic MEMS-based Safety and Arming Device

An Improved Calibration of Karagozian & Case Concrete/cementitious Model for Strain-Hardening Fibre-Reinforced Cementitious Composites under Explosion and Penetration Loadings

The dynamic response of a high-density polyethylene slow-release structure under launching overload

Numerical Simulation and Measurements of Reaction Load for an Impulsively Loaded Pressure Vessel