Abstract:Abstract Purpose Recoil length minimization is always been a top concern in various structural, industrial, and defence applications. The traditional passive recoil system is not able to respond quickly to the changes in the impact force. These limitations can be overcome by introducing a semi-active recoil system, which comprises an intelligent fluid damper. Design, methodology, and approach The electrorheological (ER) fluid, which responds to the applied electric field and exhibits high yield strength, will be a proper damper for the recoil system. An ER damper can bring back the vibrating system to its equilibrium in a brief period. In this article, the general design procedure of an ER fluid semi-active damper has been developed, which is suitable for a recoil system. The equations of damping forces (viscous, quadratic, and ER) are modified in terms of geometric parameter, namely the piston diameter ( D P ), which can be selected to obtain the desired dynamic range (greater than two) and optimum damping force. With the MATLAB software, the damper and spring specifications are fixed to meet the required conditions, viz. the dynamic range should be greater than two, and the total damping and spring force should counter-recoil the system. Findings Results obtained for a case study of gunfire conclude that the recoil system developed using design specifications exhibits desired performance with maximum recoil of 75.59 mm at 80°, angle of elevation, which is within the allowable range of 150 mm. It is shown that the rate of firing can be increased by decreasing the recoil length. Originality and value The novel procedure for the design of ER damper outlined in this work will be helpful for any recoil length minimization problem.

On Dynamics of a Cannon Barrel-Recoil Mechanism with Nonlinear Hydraulic Damper and Air-Springs

Dynamic Modeling and Simulation of Gatling Gun with Muzzle Assistant-Rotating and Recoil Absorber

Launch Dynamics Analysis of a Grenade Machine Gun with High Muzzle Velocity Based on the Soft Recoil Technology

Dynamics of a Multi-pulse Excited Rotating Beam System

Recoil Reduction Method of Gun with Side to Rear Jet Controlled by Piston Motion

Numerical Simulation of the Two-phase Flow of a Constant-pressure Rear-spray Low Recoil Weapon with Two Chambers

Dual Nozzle Weapon Power Couple Vibration Controller with Delayed Rear Nozzle

Design of ER damper for recoil length minimization: A case study on gun recoil system

Study on Micro Recoil Mechanism of the Weapon with a Nozzle and Two Chambers Separated by a Partition

Shock Wave Characteristics of Hydraulic Shock Wave Simulator with Variable Damping

Dynamic Response of Cantilevered Rail Guns Attributed to Projectile/Gun Interaction—Theory

Influence of clearance between cradle and barrel on nonlinear dynamic response of the artillery system

A Theoretical Dynamic Model to Study the Vibration Response Characteristics of an Axial Piston Pump

Research on Vibration Control of Paired Inclined Nozzles Dynamic Coupled Tubes

Nonlinear dynamics of two electromechanical arms acting discontinuously on a balloon under the action of a sinusoidal excitation

Dynamic recoil response of tensioner and riser coupled in an emergency disconnection scenario

Influences Research of Impact Factors on Gun Recoil Tester

Numerical analysis of multiphysical field for independent three-stage magnetorheological damper of double rod during recoil process of artillery

Vibration analysis of a spade-less wheeled vehicle equipped with several recoil mechanisms subjected to an impulsive force

Design and Dynamic Characteristics of a Double-Layer Permanent-Magnet Buffer under Intensive Impact Load

Modeling and dynamic analysis of artillery barrel-cradle structure with clearance