Abstract:This paper made a revisit on the contact behavior and application of a beam (rail) on a half-plane/half-space. It is found that when the beam is subjected to a concentrated force, the shear deformation of the beam must always be considered, because the deformation only occurs within a limited length of the beam. The second finding of this paper is that the reactions and the surface settlements of the half-plane/half-space are significantly affected by the load position on the cross-section of the beam (on the top of rail in the concerned areas of application) and must be considered in practice. The Flamant/Boussinesq solutions are used to establish integral equations for the surface settlement of the half-plane/half-space below the beam. The Fourier Transform is applied to the first derivative of these integral equations and to the differential equations of the Timoshenko beam. Solving these two equations and employing the inverse Fourier Transform, the deflection and the reaction can be obtained in a compact format. After dispersing the wheel pressure on top of the rail to the centroid, the deflection and reaction are in agreement with the finite element analysis. Finally, simplified equations for equivalent bearing lengths are proposed. Nonuniform distribution of the reactions along the width of the beam is treated by using an equivalent uniform width. If the shear deformation is ignored, the problem becomes the classic one solved by Biot (J Appl Mech 4:A1–A7, 1937). Compared with Biot solution, the current way of solution is compact, their minor differences are the characteristic length. The current solution is a fourth root while the Biot solution is a cube root.

Dynamic Response of Cantilevered Rail Guns Attributed to Projectile/Gun Interaction—Theory

Dynamic response of electromagnetic railgun under time-dependent electromagnetic moving loads

Dynamic Analysis of Rockfall Impact on Bridges: Implications for Train Safety

Technical Note: Three-dimensional analyses of dynamic responses of track-ground system subjected to a moving train load

Contact Behavior Between Rail and Elastic Foundation

Interior Ballistic Characteristics of Electromagnetic Rail Launcher Under Continuous Firing

Dynamic Response of Railways on Layered Half-Space Subjected to Moving Train Load

In-Bore Dynamic Measurement and Mechanism Analysis of Multi-Physics Environment for Electromagnetic Railguns

Dynamic Analysis of Integrated Launch Package in the Barrel of Railgun

Effects of the Dynamic Wheel–rail Interaction on the Ground Vibration Generated by a Moving Train

DYNAMIC RESPONSE ANALYSIS OF TRACK SYSTEM AND UNDERGROUND RAILWAY TUNNEL IN SATURATED SOIL SUBJECTED TO A MOVING TRAIN LOAD

Dynamics of a Multi-pulse Excited Rotating Beam System

Efficient Dynamic Analysis of Complex Beam Systems for Artillery Firing Using Time-Varying Mechanics

Launch Dynamics Analysis of a Grenade Machine Gun with High Muzzle Velocity Based on the Soft Recoil Technology

A Review of the Computational Investigation of Three-Dimensional Transient Magneto-Thermal Coupling Characteristics of Electromagnetic Railgun Armature and Rail in High-Speed Sliding Electrical Contact

Ground Vibration Caused by Axle Load and Dynamic Wheel-Rail Force of a Moving Train

Factors Influencing the Expansion of Arch-Shaped Electromagnetic Railguns with Pre-Stressed Composite Barrels

Dynamic Responses of Rail-Embankment-Foundation on High-Speed Railways under Moving Loads

Finite Element-Boundary Element Method Based Simulations of Electromagnetic Railgun in Augmented Configurations

Inductively Coupled Augmented Railgun

A Theoretical Investigation on Influences of Slab Tracks on Vertical Dynamic Responses of Railway Viaducts